Specifications

Voicemail-Enabled Switches CLI Commands
4
ShoreTel 14 Maintenance Guide 110
ipdt_debug_filter Assume two extensions in the system: Ext. A
and Ext. B.
To print IPDT log for Ext. A:
ipdt_debug_level – -1
ipdt_debug_filter – 1 (tell IPDT
that filter is enabled)
ipdt_restrictTraceExts "Ext A's#"
(turn on log for Ext A)
ipdt_remRestrictTraceExt "Ext A's
#" (turn off log for Ext A).
To print log for all extensions:
ipdt_debug_filter – 0
ipdt_debug_level Recommend setting to – -1 to turn on all
logging.
ipdt_dumpCCOCK Dumps BB call key state, since there is no
extension associated with BB.
Voicemail-enabled
Switch does not
support CCOCK.
ipdt_dumpExtCalls Dumps call information in the extension (e.g.
callID, legID, call state and leg state, etc.)
Not available on
Voicemail-enabled
Switch.
ipdt_dumpExtDisplay Dumps the current display view from IPDT. Not available on
Voicemail-enabled
Switch.
ipdt_dumpExtensions Dumps information for all extensions
controlled by the switch and the information
for monitored extensions and MAE (BCA)
extensions that are in the same switch and in
the different switches.
Not available on
Voicemail-enabled
Switch.
ipdt_dumpExtCK Dumps information for call keys on the
extension. Useful for troubleshooting LED
patterns and icon issues.
Not available on
Voicemail-enabled
Switch.
ipdt_resetExtDisplay Redisplay on the extension. If the phone
display and IPDT display
(ipdt_dumpExtDisplay) are desynchronized,
run ipdt_reset_ExtDisplay to synchronize
them.
Not available on
Voicemail-enabled
Switch.
ipdt_restrictTraceExts Set ipdt_debug_filter to 1. Then, use
ipdt_restrictTraceExts to turn on logging on a
particular extension.
Not available on
Voicemail-enabled
Switch.
Table 14: CLI Commands (Continued)
Command Description Notes