Specifications

Voicemail-Enabled Switches Stcli Commands
4
ShoreTel 14 Maintenance Guide 101
To record audio from a switch port:
1. From the Start menu, navigate to Control Panel > Administrative Tools and locate the IIS
Manager.
2. Right-click the IIS Manager and select Properties. This enables the ability to write to the FTP
server by selecting the Write checkbox and clicking OK.
This enables the ability to write to the following directory:
C:\Inetpub\ftproot
In Windows Server 2008, you must edit the permissions of the C:\Inetpub\ftproot directory
and give the users group write access.
3. At the CLI prompt, run the following command:.
Record2File2 (1, 60, “test”)
Audio data from running this command is stored in the file test_rx.pcm and file test_tx.pcm
in C:\Inetpub\ftproot
When you are finished capturing data, a “PCM Raw Data” file is created with the following format
profile: 8000 Hz, 16-bit, Mono and can be listened to using a standard application, such as “Adobe
Audition.”
Stcli Commands
The following describes the stcli commands. For a general description of stcli, see Stcli on page
94.
 Option 0 – Exit
This command logs out of stcli and returns control to the program from where stcli was
entered.
A user must exit stcli before starting svccli.
 Option 1 – Show Version
This command displays the system software version running on the voicemail-enabled switch.
 Option 2 – Show System Configuration
This command displays current values for system parameters that are viewable through stcli, a
user enters a 2 at the stcli prompt.
 Option 3 – Change System Configuration
This command provides access to editable parameters for modifying the system configuration.
When option 3 is selected, the cursor displays ShoreTel Config to indicate that subsequent
commands could alter the system configuration.