User guide

Enabling or Disabling Handsfree Mode

Handsfree mode is for analog telephone users who are using headsets. IP

phone users should instead choose the Auto Off-Hook Preference. See

“Changing Automatic Off Hook Preference” on page -27 for more

information.

With handsfree mode enabled, you can place or receive calls by using a

headset or the speakerphone. By default, handsfree mode is disabled. You can

enable handsfree mode by doing the following:

Step 1 Press the Options button , followed by your password

and then , or the soft key Enter.

Step 2 Press the custom key next to Handsfree to display the

following screen:

Step 3 Available options for Handsfree mode are Disabled and

Enabled. The current state is indicated with an asterisk.

Press the custom button next to the desired option.

Step 4 Press the Menu button to exit.

NOTE If you enable Handsfree mode, you will not hear dial tone on your

phone.

Options