Specifications

ShoreTel Sites
ShoreTel 7.5 Administration Guide 3 – 5
FAX Redirect
Extension
When a fax tone is detected, incoming calls are automatically
transferred to this extension. Each site may have its own fax
redirection number. Which fax redirection number is used
depends on how the call is answered.
• If the user answers the call, the fax redirection extension
of the user’s site will be used.
• If the call is answered by voice mail, the Auto-Attendant
or other menu, or a workgroup’s queue step menu, the fax
redirection extension at the site where the call originated
is used. This is the site with the trunk that handled the
inbound external call.
NOTE The fax redirection extension must be an existing user.
Admission Control
Bandwidth
This defines the bandwidth that voice media streams can
consume between this site and all other sites. The caller hears
a “network busy” prompt if this value is exceeded. To
compute the admission control value for the site, see Chapter
9, “Network Requirements and Preparation” in the ShoreTel
7.5 Planning and Installation Guide.
Emergency Number
List
This is the list of numbers that can be dialed at the site with
or without a trunk access code for emergency services. Note
that this number must not conflict with any extensions.
• Trunk Access Code Required – When this checkbox is
selected, a caller must dial the Trunk Access Code before
dialing the specified emergency number. If not selected,
entering the Trunk Access Code before the Emergency
number is permitted, but not required, to complete the
call.
• Data Entry Field – Enter the exact emergency number
required to contact the associated Emergency Service
Provider. If Trunk Access Code Required is selected, you
can also enter a number in canonical format.
• Add More – Click this button to create addition Data
Entry Fields for entering additional emergency numbers.
Each site is permitted to have a maximum of ten
emergency numbers to accommodate locations where
multiple emergency service numbers are required.
Edit IP Phone
Address Map
This link opens the IP Phone Address Map Info edit page
where you set the IP address range for sites other than
Headquarters (see Figure 3-3). All IP phones are assigned to
Headquarters by default. If Headquarters is your only site,
you do not need to set IP address ranges. If you have more
than one site with IP phones, you must set an IP address
range for each site (other than Headquarters).
This page is also accessible from the IP Phone Address edit
page. For more information, see Chapter 8, “Configuring IP
Phones.”