Specifications

Maintenance
ShoreTel 7.5 Administration Guide 16 – 27
Editing and Creating Event Filters
The Event Filter edit page, shown in Figure 16-25, lets you create new and edit
existing event filters. To add a new event filter, click add new on the Event Filters list
page, or click New or Copy on the Event Filter edit page.
Figure 16-25 Event Filter Edit Page
Parameters
The parameters on the Event Filter edit are as follows:
Server This is the server that the event filter runs on. Click All or choose a
server from the drop-down list.
Source These options define the event source for the filter. Select from the
following:
• ShoreWare—Notifies about ShoreWare events. The associated
drop-down list lets you select the ShoreWare category. Selecting
Any reports events about all ShoreWare categories.
• Services—Notifies about any non-ShoreTel service.
• Other—Notifies about any event source.
Category This lets you select a category when the Services or Other option is
selected.
Event ID This lets you select the event identification number that is referenced
in the e-mail notification.
Type These options let you select the severity type:
• Error—Requires immediate attention.
• Warning—Alerts to potential errors.
• Information—Provides status of service, switch, or port.
• All—Notifies about all three types.
Target E-mail
Address
This is the e-mail address of the intended system administration or
technical support entity.