Specifications

Using ShoreWare Director
1 – 6 ShoreTel, Inc.
Login
To access ShoreWare Director, you must enter its Uniform Resource Locator (URL) in
your web browser’s address field. Typically, this has the form:
http://<shoreware_server_name>/ShoreWareDirector
After entering the URL, click Go or press the Enter key, and the login page appears as
shown in Figure 1-3.
1
NOTE You can use the name of your ShoreWare server if you have a name resolution
service available; otherwise, use the IP address of the server.
Figure 1-3 Login Page
To log in to ShoreWare Director:
Step 1 Enter your user ID and password in the User ID and Password fields.
The default user ID and password for the system are
admin and
changeme.
The admin and changeme defaults must be changed once you assign
full System Administrator permission to a user. See the “Administrative
Permissions” on page 2-22 for information.
1. Notice in Figure 1-3 that the build number for the ShoreWare software appears above the
copyright number. In previous releases, this information only appeared when the user
hovered the cursor over the ShoreTel link.