Specifications

Configuring IP Phones
ShoreTel 7.5 Administration Guide 8 – 11
Displaying ShorePhone-IP110/115/210/212k/230/530/560/560g Settings
You can display the phone’s current IP parameters setting by entering a key sequence
from the phone’s keypad.
To display the phone’s IP parameter settings:
Step 1 Press the MUTE key followed by 4636# (INFO#). The phone will
display the first two parameters.
Step 2 Press # to advance the display or * to exit. The phone will resume
normal operation after the last parameter has been displayed.
Resetting the ShorePhone-IP110/115/210/212k/230/530/560/560g
You can reset the phone by entering a key sequence from the phone’s keypad.
To reset the phone:
Step 1 Press the MUTE key followed by 73738# (RESET#). The phone will
reboot.
Loading Custom Ring Tones
ShoreTel IP phones offer four different sets of ring tones, with each set consisting of
one tone for internal calls and another for external calls. The user is free to select from
the four tones as desired. However, in some densely populated work environments,
four tones may not be enough for users to be able to distinguish the sound of their
phone from that of their neighbors’ phones.
To help reduce confusion, most ShoreTel IP phones support the ability to load custom
ring tones on an IP phone so that each user can have a unique ring tone.
One set consisting of two custom ring tones can be loaded onto each IP phone. This
new set of tones displaces one of the existing sets of ShoreTel ring tones, as shown
below.
Figure 8-6 The 4th set of ShoreTel ring tones is replaced by the new custom tones
Ring tones must be in Microsoft Wave File format (i.e. .wav format). These custom ring
tones are not provided by ShoreTel, but numerous web sites offer files that can be
downloaded for free. A quick search should yield a large number of possibilities. Once