Specifications

Configuring Switches
6 – 52 ShoreTel, Inc.
Step 5 Determine the type of service the ShoreGear-T1 switch will provide by
clicking either the T1, T1 PRI User, or T1 PRI Network button in the
Type parameter.
WARNING If you change the Type setting, the switch automatically reboots when you
click Save.
Step 6 Select the type of CO support that the ShoreGear-T1 switch will
support from the Central Office Type drop-down list.
Step 7 If you selected T1 PRI in Step 5, select the appropriate signaling rate by
clicking either of the D-Channel Rate buttons.
Step 8 Depending on the type of T1 service provided by your telephone
company, click either the ESF or the AMI framing format button.
Step 9 Depending on the type of T1 service provided by your telephone
company, click either the B8ZS or the AMI line code button.
Step 10 Depending on the type of T1 service provided by your telephone
company, click either the Slave or the Master Clock Source button.
Step 11 Select the appropriate Line Build Out distance from the drop-down list.
Step 12 Assign a trunk group, name/number, and patch-panel jack number to
each T1 channel, or click Fill Down to configure all channels with the
same trunk group and name.
Step 13 Click Save to save the configuration. The new switch is added to the
table in the Switches page. If you modified an existing switch
configuration, the table will be updated.