Specifications

Configuring Switches
6 – 26 ShoreTel, Inc.
ShoreGear-T1 Voice Switch
The ShoreGear-T1 (Figure 6-9) provides higher-density trunking to the central office
using T1 or PRI signaling. The ShoreGear-T1 can also be used as a gateway to legacy
PBX systems. When you are connecting to both LAN connectors in a redundant
network configuration, one network port will be active and the other will be in standby
mode. If one LAN connection fails, the switch automatically changes to the other LAN
connection.
The ShoreGear-T1 LEDs are defined below. For information about the connectors,
please see the ShoreTel 7.5 Planning and Installation Guide.
Figure 6-9 ShoreGear-T1 LEDs
Ethernet LEDs
T1 LEDs
Power LED
Maintenance Port
(DB-9 Female)
LAN2 port
LAN1 port
(RJ-45)
T1 port (RJ-48C)
T1 Monitor
port
(RJ-48C)