User's Manual

Thank you for purchasing the Square Jellysh
Jelly Flashlight Remote. This device is designed
to communicate with your smartphone or
devices via Bluetooth. To set up your remote,
please follow these instructions.
Android or Apple –
The remote is congured
for the Apple devices.
If you have an Android
device perform the
following: Remove the
battery cover and remove
the battery. Gently slide
the small switch on the
PCB down for Android.
Replace battery and cover
(For the Apple system the remote can pair with iPhone,
iPod, iPad and Apple Computers with Bluetooth. Note
that not all functions are available on computer systems
or smartphones. With the wide range of Android phones
capability is unknown.)
Pairing – Press and hold the bottom half of
the oval button (about 5 seconds) the RED
LED will start to blink. The remote is now
in the pairing mode. Go to the Bluetooth
settings menu and look for SJF_G14BR2
and select “Pair” or connect.
(Please note: After pairing do not press any other buttons
while in the pairing menu.)
Camera Mode – Open the camera
application on your device. Push the
button on the Jelly Flashlight Remote and
your device will take a picture.
Flashlight –
Press the
logo and the LED will
light. Press the logo again and the light
will turn off. The color of the LED was
selected for photography
.
Sleep Mode – If no buttons are pushed for
5 minutes, remote will enter sleep mode.
Press any the button to wake the remote up.
The
logo will blink three times to show
that the remote is trying to establish two-way
communication. After communication is
reestablished it will blink once more. Press the
desired function a second time to complete
the operation. Please wait for communication
to be reestablished; pressing buttons several
times will only delay the process.
Pairing Problems –
1. The Jelly Flashlight Remote uses two way
Bluetooth communication to talk with your
device. It can only be paired with one device
at a time. If you attempt to pair the Jelly
Flashlight Remote to more than one device
this could cause a problem.
2. If for some reason you cannot pair the
remote, the rst step is to go to the setting
menu and ask your device to forget or
remove the remote from the list.
3. Press and hold the bottom half of the
oval button for several seconds until the
device appears on the list.
Changing Battery – If the remote no
longer functions properly, the battery has
probably been exhausted. Replace the
battery with a AAA alkaline battery.
Caution – Do not use the Bluetooth
remote to wake up your phone. It is
better to wake up your phone before
you use the remote.
Protected under US Patents: D546,989S and 6,793,366
Limited Warranty
This Jelly Flashlight Remote is warranted against defects
in materials and workmanship for a period of one (1) year
from the date of the original retail purchase. If a defect
exists, Square Jellysh will, at its option and to the extent
permitted by law, (1) repair the product at no charge using
new or refurbished parts; or (2) exchange the product with a
functionally equivalent product that is new or refurbished; or
(3) refund the original purchase price.
This warranty excludes damage resulting from abuse,
accident, modications, or other causes that are not defects
in the materials or workmanship. To the extent permitted
by applicable law, the manufacturer is not liable for any
direct, indirect, incidental, or consequential damage arising
out of the use or service of the product, including, but not
limited to damage which may be caused to any electronic
device, or other device utilized in conjunction with the Jelly
Flashlight Remote. To the extent permitted by applicable law
the manufacturer of the Jelly Flashlight Remote disclaims
all implied and statutory warranties, including warranties of
merchantability and tness for a particular purpose. If implied
warranties cannot be disclaimed, then such warranties
are limited in duration to the duration of this warranty. This
warranty gives you specic legal rights, and you may have
other rights, which vary from state to state.
To obtain warranty service contact Square Jellysh using
the information provided at www.squarejellysh.com. To the
extent permitted by applicable law Square Jellysh will require
proof of purchase for all warranty repairs or replacement.
JeLLy FLashLight remote
User’s manUaL
Apple/
Android Switch
Battery