Specifications

95
1-800-543-7586
New Products
The amazing new SAND-FLEE®designed for Shopsmith
is an unparalleled surface finishing wizard
The SAND-FLEE
®
attaches to your machine just like all our other Special
Purpose Tools, giving you a variable speed sander that promises to save you
hours of tedious hand sanding.
You’ll use it to remove that final whisker off the edges, ends or surfaces of
wood, composite – even metal projects without fear of burning, sniping or
injury. And when you’ve finished, you’ll have a surface that’s far smoother
than anything you could hope to attain by hand or with the aid of another
machine – in anywhere near the smae amount of time.
Its 23˝ x 21-1/4˝ stainless steel top supports your stock as you advance it
across the rotating, 18˝ long, aluminum Drum, positioned hust beneath it
surface. The Drum and the abrasive rool used on it are both covered with
hook-&-loop material to facilitate quick, easy grit changes – then the table
height is adjusted so that only the abrasive grit is proud of the table surface.
Although it has a 2-1/2˝ dust collection port, it captures 85% of its own dust
inside the cabinet – so you’ll seldom need to hook it up.
Get added precision and control with the Kreg Deluxe Bandsaw Rip Fence
Deluxe Fence increases your Bandsaw’s ripping capacity and cutting versatility
To install the abrasives, cut your strips to the specified length using the
patterns we provide and rotate the drum by hand to wind the 3˝ wide
abrasive onto the Drum. Install strips of two or three different grits if you
like – for multiple - step super-smooth sanding without stopping work for
grit changes.
Besides its obvious advantage of sanding the surfaces of stock up to
36˝ wide. It’s also perfect for specialized operations such as:
Joining the edges of stock.
Sanding the protruding components of joinery (such as mortise-and-
tenon, dovetails or box joints) flush with surfaces.
Safely finish-sanding the surfaces of resawn boards of super-thin
veneers – or ends of long or tall standing workpieces – without fear
of them being grabbed or thrown.
556042
Shopsmith SAND-FLEE
®
$599.99
Finishing Drum Sander
(Manual included)
Guide Sanding Fence helps you guide workpieces across the
rotating Drum. 24-3/8˝ long w/ three T-slots, plus hardware and
threaded knobs for attaching to the slots in the SAND-FLEE
®
Table.
556043
Optional SAND-FLEE
®
Fence
$79.99
Hobby-Pack Abrasive Roll Package, Inlcudes six, 3˝ x 10-meter
rolls of hook-and-loop abrasives–one each, 100, 120, 150, 180,
220 and 320-grit. (Approx. 8 full-width wraps per roll)
556044
Hobby-Pack Abrasive Roll Pkg
$107.95
Individual Abrasive Rolls 3˝ x 10-meter rolls
$19.95
each
556045
100-Grit
556048
180-Grit
556046
120-Grit
556049
220-Grit
556047
150-Grit
556050
320-Grit
Optional Micro-Adjuster
clamps into the Fence Rail
T-Slot with a large comfort-
able knob. Then, simply
loosen the Fence Mounting
Head and rotate the Micro-
Adjuster’s thumbwheel to
gradually advance or retrieve
the Fence by 1/20˝ with
each full rotation.
Optional 4 ½˝ high Resawing
Guide attaches to the T-Slot in the
Rib Fence face. Its gently curved
face allows you to follow a drawn
line down the top edge of a board
to be resawed ... compensating
for blade lead as you go. The
Pros say, these are the best style
Resawing Fences!
522460
Mounting Rail & Hardware
$89.00
556032
Front & Rear Fence Supports
$39.00
556005
20˝ Premium Bandsaw Fence
$59.95
556030
Complete Bandsaw Rip Fence System $174.99
(Includes Mounting Rail & Hardware,Front & Rear
Fence Supports and Premium Bandsaw Fence)
522511
Bandsaw Fence Micro-Adjuster
$15.99
522514
Bandsaw Fence Resawing Guide
$18.99
556031
Deluxe Bandsaw Fence System
$209.97
(Includes Complete Bandsaw Rip Fence System,Micro-Adjuster & Resawing Guide)
Note: Not for older model Bandsaws with cast iron worktables.
This Fence System was designed exclusively for the Shopsmith Bandsaw.
The rugged aluminum rail extrusions attach to the existing holes in theun-
derside of late model Shopsmith Bandsaws with self-tapping bolts (included).
Once attached, you’ll have a 20˝ long by 2 3/4˝ high precision rip fence with
a direct-reading scale that locks firmly into position with a single knob to
rip stock up to 9 3/8˝ wide (that’s 4 3/8˝ wider than our regular Bandsaw
Fence). Its face and top surfaces both include preformed T-slots to accepts
Shopsmith’s Flip Stops, Featherboards, and Utility Lights – or your choice of
special shop-made jigs and fixtures.
This Fence can also be laid down and attached to the mounting head
horizontally. The Fence fac can also be used with your Premium bandsaw
Fence on the MARK V or other Shopsmith tools.