Specifications

11
1-800-543-7586
Bandsaw Dust Chute eliminates
dust and debris at the source
For earlier model
Bandsaws without
Dust Chutes
Includes all mounting
hardware and instructions.
300000 Retro-Fit Bandsaw $18.29
Dust Chute
Make your older model Shopsmith
Bandsaw run smoother and quieter
NO MORE SQUEALING!
If the backup rollers on your older model
Shopsmith Bandsaw are worn or driving you
crazy with their incessant squealing, here’s
your solution!
Permanently lubricated Ball Bearing Assemblies
work with 1/16˝ through 5/8˝ Blades to reduce
friction and make your Blades last longer. For
Bandsaws with serial numbers prior to 97932.
Replaces Upper, Lower and Auto-Track Back-
Up Rollers. Easy to install.
555074 Bandsaw Retro-Fit Kit $27.71
Step up to the precision and
convenience of Shopsmith’s
current Bandsaw Table System
For earlier model Bandsaws with
cast iron tables
Now, you can enjoy our new, 45% larger
aluminum Bandsaw Table with all its provisions
for our Bandsaw Rip Fence, Table Extension
and Circle Cutter.
Order just the Table now and
add accessories later – or
order the complete Table System and save!
555667 Bandsaw Table System $246.59
(Includes Fence, Extension Table,
Circle Cutter & Table Retro-Fit Kit)
YOU SAVE $22.30
Bigger is better with the Table
Retro-Fit Kit
40% larger, tilts a full 45°, with an adjustable
table insert. Required to use with our Bandsaw
Fence, Table Extension and Table Retro-Fit Kit.
555487 Bandsaw Table $116.91
Retro-Fit Kit (Table only)
See Page 9
Bandsaw Upgrades
Kreg Bandsaw Fence/Bandsaw Upgrades
Deluxe Fence increases your Bandsaw’s ripping
capacity and cutting versatility
This Fence System was designed exclusively
for the Shopsmith Bandsaw. The rugged
aluminum rail extrusions attach to the
existing holes in the underside of late
model Shopsmith Bandsaws with self-
tapping bolts (included). Once attached,
you’ll have a 20
˝
long by 2
3
/
4˝
high
precision rip fence with a direct-reading
scale that locks firmly into position with
a single knob to rip stock up to 9
3
/
8˝
wide (that’s 4
3
/
8˝
wider than our regular
Bandsaw Fence). Its face and top surfaces
both include preformed T-slots to accept
Shopsmith’s Flip Stops, Featherboards,
and Utility Lights – or your choice of special,
shop-made jigs and fixtures.
This Fence can also be laid down and
attached to the mounting head horizon-
tally. The Fence face can also be used with your Premium Bandsaw Fence on the MARK V or other
Shopsmith tools.
Note: Not for older model Bandsaws with cast iron worktables.
Optional Micro-Adjuster clamps into the Fence Rail
T-Slot with a large, comfortable knob. Then, simply loosen
the Fence Mounting Head and rotate the Micro-Adjuster’s
thumbwheel to gradually advance or retrieve the Fence
by 1/20
˝
with each full rotation.
Optional 4
1
/
2˝ high Resawing Guide attaches to the
T-Slot in the Rip Fence face. Its gently curved face allows
you to follow a drawn line down the top edge of a board
to be resawed ... compensating for blade lead as you go.
The Pros say, these are the best style Resawing Fences!
Optional Micro-Adjuster
Optional 4
1
/
2˝ high Resawing Guide
522460 Mounting Rail & Hardware
$93.45
556032 Front & Rear Fence Supports
$40.95
556005 20˝ Premium Bandsaw Fence
$62.95
556030 Complete Bandsaw Rip Fence System
$183.74
(Includes Mounting Rail & Hardware, Front & Rear
SAVE $13.61
Fence Supports and Premium Bandsaw Fence)
522511 Bandsaw Fence Micro-Adjuster
$16.79
522514 Bandsaw Fence Resawing Guide
$20.53
556031 Deluxe Bandsaw Fence System
$220.47
(Includes Complete Bandsaw Rip Fence System, Micro-Adjuster & Resawing Guide)
Get added precision and control with
the Kreg Deluxe Bandsaw Rip Fence
NEW