Specifications

88
www.shopsmith.com
Safety Push Stick... with a comfortable handle
to keep you out of harm’s way.
Angle Gauge... that measures and marks 30°,
45°, 60° and 90° angles.
6 ˝ Hook Rule... measures lengths from edges.
9 ˝ Rule... for taking quick measurements.
Center-Finder.. . for marking centers of dowels
and lathe spindles.
90° Square... for checking joints or machine
set-ups.
521845
Saw Aid
$16.54
Horsehair Bench
Brush removes sawdust and chips
Horsehair Bench Brush has been the choice
of woodworkers and other craftsmen for
generations. 13˝ long with 2
1
/8˝ long genuine
Horsehair bristles.
753118
Horsehair Bench Brush
$13.69
Minwax
®
Paste Finishing Wax coats
and protects your power tool surfaces
Just apply a thin coat of
the premium-quality wax
to the exposed metal
surfaces of your MARK V
or Special Purpose Tools
to protect against rust
and corrosion.
It provides and easy-
glide, virtually friction-
free surface for work tables, rip fences and
similar work-guiding surfaces. 16 oz. can.
522454
Minwax
®
Paste Wax
$9.99
Router Dovetail Fixture makes perfect half-blind
dovetails and box joints
720428
Router Dovetail Fixture
521873
1/2˝ Dovetail Router Bit
$10.49
521874 3/8˝ Straight Router Box Joint Bit
$10.49
Rout or sand without clamping using
the Router Master Mat
Handy Gauge helps you set router bit
depths accurately
Spring-loaded Chisel squares routed
corners for hinge mortises and more
Just drop the self-aligning
chisel into the rounded corner
of any mortise or recess made
by a router bit (such as the
rabbet in the back of a picture
frame) and strike it with a
hammer to transform the
mortise into a perfect 90°
corner in a single whack. No measuring.
No mistakes.
518982
Router Corner Chisel
$16.59
Shop Accessories
Multipurpose Saw Aid
®
works seven
ways to improve your safety and
precision as a ...
Just mount your router to
the special base, clamp your
mating workpieces into the
guide comb and go to work.
Makes 1/2˝ half-blind dovetails
and splicing dovetails (joining
two boards end-to-end), as
well as 3/8˝ box joints. Will not
cut through dovetails. Includes
step-by-step instructions for
use. Bits ordered
separately below.
Made in Germany.
$62.99
This 24˝ x 36˝ mat holds your workpiece in
position without sliding or moving as you rout.
Rolls up for storage.
712001
Router Master Mat
$10.99
A dado or groove that’s too deep can jeopardize
the strength and ruin the appearance of a joint.
This handy gauge eliminates these problems
by providing accurate settings in an instant.
Just rest the gauge’s feet on your router’s
base or your router table insert and move the
appropriate notch over the tip of your bit to
make your setting. Graduated in 1/16˝ incre-
ments from 1/8˝ to 1˝. Can also be used to
set saw blade depths up to 1˝.
521939
Router Bit Depth Gauge
$8.39