Specifications

87
1-800-543-7586
Mobile Base brings portability
to machines and work tables
Store machines and work tables out of the way
until needed ... then roll them out to go to work.
Base is adjustable in 1˝ increments from
a 12˝ x 12˝ square to a 36˝ square or a
20˝ x 52˝ rectangle. Four wheel design features
3˝ diameter locking wheels and adjustable
rubber leveling feet. Supports up to 400 pounds.
Made in the USA. Lifetime warranty.
521718
Universal Mobile
$83.99
Base
Table Height Adjustable Stop
Collars – for consistent accuracy
Use the Adjustable Stop Collar to set incremental
table height adjustments (1 turn = 1/16˝) for
Dado cuts, Tenons, Molding head cuts, finger
Joints, saw blade height and shaping.
You can also use them to set extension tables,
moving your fence in relation to the quill in the drill
press position, Special Purpose Tool alignments,
plus routing while using the Speed Increaser.
555937
Adjustable Stop Collar
$29.99
Cover protects your MARK V from
condensation and rust
This rugged, cotton/polyester cover is custom-
sewn to the shape of your Shopsmith MARK V.
The special urethane coating repels moisture
while a unique perforation process allows
any moisture that might get in from below to
escape, preventing rust and corrosion.
515306
MARK V Cover
$40.94
Models 500, 505, 510 & 520
DC3300 Handle Retro-Fit Kit
For Dust Collectors made prior to May 2000
This inexpensive, simple-to-install kit lets you
attach an additional Handle to the top of the
3-Way Inlet on your DC3300 for convenience
when moving it around the shop.
The Kit includes the handle, two screws and
a template for marking pilot hole positions.
You’ll need a center punch, a 5/32˝ drill bit and
a Phillips screwdriver to do the job. Takes about
5 minutes.
521769
DC3300 Handle
$15.87
Retrofit Kit
After retiring, I began thinking of
woodworking as a hobby. I purchased
a MARK V and have since added a
Bandsaw, Jointer, Planer, Jig Saw and a Scroll
Saw. With these tools, I have made many
woodcraft projects for my grandchildren.
~ Walter Menner, Millstadt, IL
✍
4-In-1 Razor Saw is perfect for
working on small projects
The comfortable wooden handle on this special
Razor Saw Set holds a nest of four interchange-
able steel blades that can be attached and
removed with a single wing nut. Ideal for all
types of work where precision is important.
Includes the following four blades:
Depth
Length of Cut T.P.I. Thickness
Back Saw 5
1
/
2
˝
1
13
/
16
˝
32 .010
˝
Back Saw 4
1
/
2
˝
13/32
˝
52 .008
˝
Keyhole 1
3
/
8
˝
2
1
/
4
˝
24 .022
˝
Push
3/8
˝
4
1
/
2
˝
24 .022
˝
Keyhole
521810
4-In-1 Razor Saw
$13.59
Radis-Plane softens edges
Shop Accessories
Miscellaneous
Shopsmith Accessories
Rawhide Mallet won’t damage lathe
centers or chisel handles
Avoid damaging your tools and your projects.
The tough, non-marring rawhide head is 4˝ long
x 2˝ diameter. Perfect for setting Lathe Drive
Centers and a host of other jobs.
730271
Rawhide Mallet
$27.59
Flush-cut Saw won’t mar
workpiece surfaces
Use it to cut off dowels, tenons and similar
protrusions without fear of marring surfaces.
Super-thin, 6˝ long blade has 19 teeth-per-
inch with no set. 12˝ long overall.
521933
Japanese Flush-Cut
$13.99
Saw
This clever little plane is the perfect choice
for rounding over sharp project edges for
reasons of safety, appearance or, in the case
of cabinet doors, for a better, more professional
looking fit. The radius can be adjusted from
1/16˝ to 1/4˝ on any edge. The first of two
cutters makes the initial cut, while the second
cleans a perfect radius.
Includes the Radius Blade Set (a Straight
Blade Set is available for creating chamfered
edges). Maple body with a brass soleplate.
735000
Radis-Plane with
$26.19
Radius Blade
735050
Replacement Radius
$8.39
Blade Set
735051
Straight Blade Set
$8.39
For chamfering