Specifications

85
1-800-543-7586
Easily plot angles to within 1/2°
accuracy with this 6˝ Precision
Marking Protractor
This 21st
century Marking
Protractor has
micro-fine guide
holes at every
45°, 30° 22.5°,
5°, 1° and 0.5°
interval to plot any angle with ease and absolute
accuracy. A metal T-Bar and see-through
crosshairs provide exact alignment against the
edge of your workpiece. Remove the T-Bar
to work on flat surfaces. Contains four angle
scales: 0° left to 180° right, 180° left to 0°
right, 0° top to 90° left and right, and 90° top
to 0° left and right suits every need. It’s easy
on the eyes, incredibly accurate, and just plain
fun to use!
522172
6˝ Incra Precision
$31.39
Marking Protractor
(Calibrated to 1/2° & 1/32 ˝)
Mite-R-Gauge measures and
transfers odd angles with
1/2° precision
The measuring
and setting of
precise angles
is extremely
important in
woodworking.
Triangles are
ideal for most
applications, but they will not do for many ˝odd˝
angles.
The Mite-R-Gauge Protractor/Bevel features
long legs with direct-reading protractor scales
that make easy work of this otherwise difficult
job and allows you to measure and read the
angle in a single step ... within 1/2 degree.
Once the angle is set, a quick twist of the
knob locks the gauge in position for transferring
to your table saw or other machine.
730342
Mite-R-Gauge
$21.99
Protractor/Bevel
Drop a pencil point or
scribe through the Micro-
fine hole or slot for your
measurement and mark
it. Precisely!
Easy-to-use, versatile and
precise are the words that best
describe the Incra T-Rule. Micro-
fine marking holes and slots at
every 1/16˝, 1/32˝ and 1/64˝
scale position instantly locate
your sharp pencil or scribe at
the exact measurement with
zero uncertainty and no eye
strain! This guarantees that the
precision built into the Incra
T-Rule actually shows up in your
finished work. Comes in 6˝ and
12˝ lengths.
Revolutionary, zero-error Steel Rule
ensures that your measurements are
dead on-the-money – every time!
522174 6˝ Incra Precision T-Rule
$20.99
Calibrated to 1/64 ˝
522173
12˝ Incra Precision T-Rule
$36.69
Calibrated to 1/64 ˝
Sliding Bevel helps you measure
and duplicate angles
Great for
setting table,
radial arm or
circular saw
angles for
moldings
and more.
Also used for
measuring
angles (with
the aid of a protractor). A quick flip of the
brass lever locks the setting firmly.
Features an attractive handle with brass
at all wear points.
518957
Sliding Bevel
$17.59
Direct-reading Gauge takes the
guesswork out of measuring the
thickness of lumber or turnings
This
inexpensive
aluminum
gauge offers
the perfect
way to check
the thickness
of lumber you may be buying, workpieces you
may be planing, or bowls or similar projects
you may be turning on the lathe. Just slip the
curved jaws over the item to be measured and
read the thickness from 1/32˝ to 2˝
(0 to 55mm) on the dial.
518991
Thickness Gauge
$10.99
Shop Accessories
Here’s a fast-reading, digital caliper that’s
loaded with great features plus, represents
an outstanding value that’s tough to beat.
Made of rugged, hardened stainless steel, it will
measure inside dimensions, outside dimensions
and depths at a glance, and report to you in your
choice of thousandths or millimeters.
Features switchable inch/millimeter selection;
on/off switch; zeroing button; easy head locking
mechanism; and a replaceable battery.
556020
6˝ Dial Caliper
$22.99
NEW
Affordable 6˝ Digital Dial Caliper measures in thousandths & millimeters