Specifications

78
www.shopsmith.com
FBEDC
L
K
N
MIH
J
G
A
Shopsmith’s Lathe Turning Package is a great Starter Set & a nice value, too!
Start with our 5-Piece Lathe Chisel Set; add
both of our Lathe Faceplates, a Lathe Screw
Center, a Tailstock Live Center, and a Tailstock
Chuck Arbor.
505754
Lathe Turning
$201.23
Package
YOU SAVE $17.01
G.
Lathe Drive Center grips your turnings
securely –
Four-spur Center “drives” your
workpiece during lathe operations. Just use
a mallet to drive the spurs into the center-
point of your stock and attach it to the
MARK V spindle with a single setscrew.
Standard with MARK V.
505715
Lathe Drive Center
$29.99
H.
Lathe Cup Center supports non-driven end
of spindles while turning – Designed
for use on the Shopsmith MARK V or any
tailstock having a #2 Morse Taper. Allows
workpiece to spin freely when powered by
the Drive Center. Standard with MARK V.
505716
Lathe Cup Center
$18.47
I.
Lathe Live Center eliminates workpiece
burning – Friction-free, ball bearing construc-
tion allows the tip to rotate freely without the
need for beeswax or similar lubricants. Fits
any #2 Morse Taper Tailstock.
505602
Tailstock Live Center
$41.99
J.
Lathe Screw Center is ideal for small
turnings – Especially designed for turning
small diameter workpieces from 1˝ to 5˝ long
without using a Tailstock Center.
505601
Lathe Screw Center $24.57
Lathe Faceplates provide wobble-
free support for turning bowls, etc.
Feature multiple holes for mounting different
sized turning blanks. Mount to MARK V or any
5/8˝ diameter spindle with single setscrew.
K.
505590
3
3
/4˝ Faceplate
$24.99
L.
505591
6˝ Dia. Faceplate
$31.99
M.
Tailstock Chuck Arbor lets you center-drill
turned spindles – Use for center drilling
lamp standards and the ends of workpieces
mounted to the MARK V’s driven spindle.
#2 Morse Taper end slips into MARK V’s
Lathe Tailstock. Drill Chuck mounts on
opposite end.
505603
Tailstock Chuck
$20.78
Arbor
N.
Double-Stick Tape holds small diameter
turnings to your Shopsmith Faceplates
This special, 1˝ wide, high-adhesion tape has
amazing gripping power!
Caution: Always use a clamp or vise to apply
sufficient pressure to ensure a good bond
between the Faceplate and the workpiece.
Do not turn an excessively long workpiece or
one that is more than 1
1
/2 times the diameter
of the Faceplate. Failure to ensure a good
bond or turning a workpiece that’s too large
could result in personal injury.
755007
Double-Stick Tape
$10.43
O.
Outside Caliper is a real must for lathe
turners – Use for duplicating measured
spindle cuts and gauging the thickness
of bowl walls.
730221
Outside Caliper
$23.09
P.
Precision tool locates the exact center
of turning stock in seconds – Works with
round, square, hexagonal or octagonal
stock. Center cutout allows marking.
731195
Center Finder
$11.06
O
P
A.
Shopsmith’s 5-Piece Lathe Chisel Package
handles all your basic turning needs
Made of premium-quality, high-speed steel,
Shopsmith’s Lathe Chisels will take and
hold a keen cutting edge under hard use.
Comfortable hardwood handles are a joy
to hold.
Package includes:
• 1
˝
Skew with a straight, slanted edge
for cutting beads, smoothing and
forming round shapes.
• 3/8
˝
and 1
˝
Gouges for cutting coves and
roughing stock to make it round.
• 1/2
˝
Parting Tool for grooving, cutting
shoulders, sizing cuts and separating your
project from the scrap.
• 1/2
˝
Roundnose for bowls and other
faceplate-mounted projects.
505586
5-Piece Lathe
$93.75
Chisel Package
YOU SAVE $9.52
Individual Lathe Chisels
B.
515030
Parting Tool
$19.73
C.
515028
3/8˝ Gouge Chisel
$19.73
D.
515029
1/2˝ Roundnose $19.73
Chisel
E.
515027
1˝ Gouge Chisel
$22.04
F.
515026
1˝ Skew Chisel
$22.04
Turning
Shopsmith’s Lathe Chisels, Faceplates and Centers
The tools you need to start building your turning skills