Specifications

Adjustable, See-Through Lathe Shield
Protect your eyes from flying chips and debris
during turning with this 12
5
/
8
˝ x 11˝ impact-
resistant, see-through Shield. Attach the
Mounting Support Bracket to the back side of
your MARK V’s Headstock (hardware included),
slide the Gooseneck’s notched end over the
Bracket and go to work.
The complete Kit includes the See-Through
Shield, 24˝ Gooseneck Arm with attached, slip-
on Mounting End, Support Bracket, Mounting
Hardware and full instructions. Order extra
Support Brackets for your other machines.
522198
See-Through
$54.27
Lathe Shield
555520 Extra Support Bracket
$4.55
With hardware
Now you can quickly and easily make multiple
spindle or faceplate turnings that match perfect-
ly. Create chair backs, newel posts and stair
railings. Turn matched sets of bowls or round
gift boxes. Duplicate pieces up to 8˝ in diameter
with cuts to 3
1
/4˝ deep! Work with flat patterns
or existing turnings such as worn or broken
porch spindles.
A simple Micro-adjustment assures Cutting
Tip to Follower Tip alignments as close as 1/64˝.
Then just grasp the Floating Tool Rest Assembly
(which holds the Cutting and Follower Tips)
firmly with both hands, and glide it smoothly
across the Work Table surface while the
Follower Tip traces the pattern and the Cutting
Tip does the work. Simple!
The two-handed grip gives you positive
control of every cut. Use the Follower Tip when
duplicating, or remove it and turn free-hand
without fear of gouging or snagging.
The rugged Work Table mounts in your MARK
V’s Table Carriage. Heavy steel supports clamp
quickly to the MARK V’s upper way tubes to
hold the pattern securely. Includes Safety Guard
and 12˝ wide, clear Chip Deflector Shield for
added safety. Folds for compact storage.
555638
Shopsmith Lathe
$461.99
Duplicator
Includes: Standard Accessories, including
one 60° Triangle Cutting Tip
The Shopsmith Lathe Duplicator is a
Special Truck Shipment item and requires
an additional $15 shipping fee.
Specifications
Maximum length of workpiece ...................... 34
˝
Maximum length of turning .......................... 32
˝
Minimum length of workpiece
With standard Cup Center ....................... 6
1
/
4
˝
With Live Center and spacer ................... 4
1
/
4
˝
Maximum turning diameter
from a flat template ......................................... 8
˝
Maximum turning diameter
from 3-dimensional pattern ............................. 4
˝
Cutter Profiles and matching
Follower Tips
Standard Accessories:
• Mounting Brackets with Unistrut
®
Support Bar
• 60° Triangle Cutter and Follower
• 12˝ Floating Chip Shield
• Floating Tool Rest Assembly
• Heavy-Duty Work Table Assembly
• Two Reversible Pattern Clamps
• Live Center Extension Spacer (optional
Tailstock Live Center is not included, but
recommended).
See Page 78
Turn beautiful, perfectly-matched spindles or bowls
with the easy-to-use Shopsmith Lathe Duplicator
Duplicator Steady Rest
Recommended when turn-
ing long or small diameter
spindles to eliminate whip,
chatter and vibrations.
Assures a smoother finish with less chance of
workpiece breakage. Fully adjustable. Accepts
stocks with diameters from 3/16˝ to 3
1
/2˝ in dia.
Permanently lubricated ball bearing.
555639
Lathe Duplicator
$54.18
Steady Rest
1/2˝ Cone Cutter/Follower
Precision-ground, high-
speed steel with extra-
sharp edge for fine,
smooth shaving cuts in
both soft and hardwoods.
555278
1/2˝ Cone Cutter/
$14.51
Follower
77
1-800-543-7586
Lathe Duplicator
555213
35° Diamond Cutter - For turning
fine beads of deep, intricate detail.
$24.81
555211
60° Triangle Cutter - Universal tip,
from rough turning through medium details.
Comes standard with Lathe Duplicator.
555210 1/2˝ Round - For initial roughing/
forming curves and coves.
555212
3/8˝ Square - For turning long, flat
surfaces, dowels and plugs.
$24.81 Each