Specifications

76
www.shopsmith.com
• Quick-Release
Jaws
• Drill Press or
Bench Mount
• Rugged Steel
and Aluminum
Construction
• A Must-Have
Accessory
Occasionally, a product comes along that’s so
handy, it’s tough to do without. This is one of
those products. Most vises that are worth their
salt can cost upwards of $100, and then, all
you usually get is either a Bench Vise OR a
Drill Press Vise.
However, with this one Vise, you get both .
As a Drill Press Vise, it mounts directly to the
Miter Gauge Slots in your MARK V Work Table
with two Sliding T-Nuts, Buttonhead Bolts and
Fender Washers (included).
You’ll reach for it whenever you need to hold
workpieces for drilling or routing operations. As
a Bench Vise, you can clamp it onto any surface
up to 2
1
/2˝ thick in a vertical, horizontal, 45° or
even upside-down position to hold any object up
to its 4˝ jaw opening.
Stationary 1
3
/8˝h x 3
7
/8˝w Jaw features both
vertical and horizontal V-Slots for gripping round
or odd-shaped objects. Just depress the quick-
release button on top and the movable Jaw
slides open in a single, quick action.
Includes Vise, Bench Clamp, two Sliding
T-Nuts (514491), two Buttonhead Bolts and two
Fender Washers for MARK V mounting.
556416
Bench/Drill Press Vise
$59.64
Shopsmith’s T-Track Utility Light sheds light on close-up work
This special Fence Light Kit includes a Shopsmith
Utility Light (555503) and a special bracket for
mounting it quickly to the T-Track on the top of
your MARK V’s Rip Fence or the T-Slots in your
work table surface (Models 510 or 520 only).
Can also be used with later model Shopsmith
Bandsaws and Bandsaw Fences, and the
Shopsmith MARK V Router Table Kit. Just slide
the bracket into position and lock with a quick
twist to hold and aim your Utility Light exactly
where you need it.
555806
T–Track Utility Light Kit
$71.30
Includes Utility Light and Bracket
521787
T-Tract Light Support
$22.22
Bracket Only
Flip-up Rip Fence Stop ensures
precise repeatability at up
to 32˝ from center
Here’s the perfect accessory for repetitive
drilling operations or for controlling “stopped”
operations such as dadoes, grooves, bandsaw
cuts or decorative molding and routing operations.
Just attach the aluminum Extension Rail to
the top of your MARK V’s (505, 510 or 520) or
later model Bandsaw Rip Fence and lock it into
position with a quick twist of the Knob. The
special extension Rail includes two built-in
washers to hold the Rail parallel when it’s
extended beyond the end of your Rip Fence.
You’ll get a full 32˝ of adjustment from the
center of a Model 510 Work Table (31˝ on a
Model 520).
Then, slide the Flip-Up Stop onto the Rail and
twist the Locking Knob. Flippers are reversible
to work on either side of the Fence. Order extra
Flippers for multiple stops.
555807 Flip-Up Rip Fence Stop
$44.09
Models 505, 510 & Bandsaw Fence
555808
Flip-Up Rip Fence Stop $44.09
Model 520 Only
52170801
Flip Stop
$14.27
Models 505, 510 & Bandsaw Fence
52170802
Flip Stop
$14.27
Model 520 Only
Plug Cutters help you cover unsightly
screwheads with matching wood
On Bench Off Bench
Versatile, Multi-Purpose Drill Press/Bench Vise comes
With mounting hardware for your MARK V Work Table
Drilling
90°Angle
45° Angle
Exposed screwheads can spoil the appearance
of an otherwise spectacular project. You can
make your own plugs out of the very same wood
you’re using for your project; and they’ll match
so perfectly they’ll become practically invisible!
This set of three Cutters will create tapered,
easy-to-insert 1/4˝, 3/8˝ and 1/2˝ plugs up to
1˝ long. German-made, they all feature 1/4˝
shanks. Recommended for use in drill presses.
522477
3-Piece Tapered Plug
$27.99
Cutter Set