Specifications

Work easier and safer with these
three great drilling accessories
A. 3-Lever Drill Press Quill Handle for
more leverage, control and convenience
Ergonomically correct Handle attaches to
either side of the MARK V Headstock to
give you the maximum leverage and com-
fort without “over-reaching” when Drilling,
Drum Sanding, Routing or Shaping.
555491 3-Lever Drill Press $30.19
Handle
B. Precision Drill Chuck and Key
For MARK V or any 5/8˝ lathe spindle.
1/2˝ shank capacity.
505633 Drill Chuck w/Key $40.49
C.
Tailstock Chuck Arbor – Used for center
drilling lamp standards and the ends of
workpieces mounted to the MARK V’s
driven spindle. #2 Morse Taper end slips
into MARK V’s Lathe Tailstock. Drill Chuck
mounts on opposite end.
505603 Tailstock Chuck $20.78
Arbor
Breathable Machine Cover protects
your MARK V from condensation
and damaging rust
This rugged, cotton/polyester cover is custom-
sewn to the shape of your Shopsmith MARK V.
The special urethane coating repels moisture
while a unique perforation process allows
any moisture that might get in from below to
escape, preventing rust and corrosion.
515306 MARK V Cover $40.94
Models 500, 505, 510 & 520
75
1-800-543-7586
Forstner bits are designed to handle tasks that
other bits just can’t tackle. First, they have
practically no center spur, so they’re ideal for
boring almost perfectly flat-bottomed holes like
those found in holders for candles or salt and
pepper shakers – or, hollowing out small,
circular boxes for rings, jewelry, etc.
Thanks to the small spur, you can use most
forstners to drill to within 1/32˝ of the bottom
of your workpiece without fear of the center
spur chewing through the wood.
They’re also great for boring exceptionally
clean angled holes or overlapping holes; for
re-locating an existing hole by enlarging it; for
making round-end mortises; for drilling into
end grain; and for drilling larger diameter
holes in extremely thin stock, such as veneers,
without splitting.
Furthermore, because of their unique design,
they won’t “wander” off center, even through
knots, bird’s-eyes, and irregular grains. In short,
they do all the things most bits can’t do.
Forstner bits are available in four individual
sizes or a complete set for additional savings.
All bits offer a 5/16˝ shank. Each is 3
1
/2˝ long
overall. Definitely, the most versatile and
convenient drill bits you could ever own!
720015 3/8˝ Forstner Bit $10.36
720016 1/2˝ Forstner Bit $11.38
720017 5/8˝ Forstner Bit $13.61
720018 3/4˝ Forstner Bit $14.81
720019 7/8˝ Forstner Bit $15.84
720020 1˝ Forstner Bit $18.07
555749 Forstner Bit Package $68.62
Includes all 6 bits above
YOU SAVE $15.45
A
B
C
Drilling
Amazingly versatile, they’re the world’s
most unique bits!