Specifications
74
www.shopsmith.com
Basic Alternate Completer Super
Part # Size Set Set Set Set Retail
555016 1/8˝ $6.64
505879 3/16˝ X X X $8.18
505880 1/4˝ X X $8.18
505881 5/16˝ X X X $9.23
505882 3/8˝ X X $10.25
505883 7/16˝ X X X $11.54
505884 1/2˝ X X $13.77
505885 9/16˝ X X X $12.70
505886 5/8˝ X X $14.92
505887 11/16˝ X X $15.80
505888 3/4˝ X X $17.42
505889 13/16˝ X X $19.88
505890 7/8˝ X X X $22.06
505891 15/16˝ X X $25.80
505892 1˝ X X X $26.81
555417
555415
505905
555416
PRICE PER SET $57.41 $86.82 $137.75 $267.21
YOU SAVE $7.13 $3.70 $14.25 $12.98
Brad Point Bits are your best choice for most
woodworking applications: Boring holes for
dowels or round tenons; Pilot holes for screws
or bolts; Counterbores. Whenever you need a
clean hole, you need a Brad Point Drill Bit.
These bits are manufactured to our exacting
specifications from high quality carbon alloy
steel to take and hold a keen cutting edge
under heavy use. All Bits are 5
1
/2˝ long and
those above 1/2˝ diameter feature 1/2˝ shanks.
The quality Hardwood Case (with polyurethane
finish) features a form-fitting slot for each Bit.
Here’s why Brad Point Bits are
the Pro’s choice:
Brad Point Drill Bits
The last word in quality wood boring Drill Bits
When boring holes in wood, always use a wood bit!
• A super-sharp point at the tip locates
the hole with unwavering precision,
then “bites-in” to hold the bit on center
as it advances, guaranteeing “on-target”
hole location.
• The two side spurs slice cleanly through
the wood fibers making a perfectly round,
splinter-free entry and exit, while the
precision-ground edges shave the hole side
clean. Deep chip channels quickly eject the
chips.
• High quality carbon alloy steel holds its
edge while radiused step adds strength
and durability.
Shopsmith Brad Points are available
individually or one of four sets, as
described in the chart at the bottom
left. All bits above 1/2˝ have 1/2˝ shanks.
Form perfect screw head recesses
with this single-fluted, quick-
cutting, 3-piece Countersink Set
Use this set of three single-flute, precision
ground cutters to recess the heads of screws
and bolts flush with the surface.
Includes: 1/4˝, 1/2˝ and 5/8˝ diameters
to cover the smallest to largest screwheads.
German-made for use with portable electric
drills or drill presses. All have 1/4˝ shanks.
722016 3-piece Countersink
$26.19
Set