Specifications

9
1-800-543-7586
A
B
C
Three-piece Accessory Package
helps you get the most out of your
Shopsmith Bandsaw
A.
Bandsaw Fence delivers improved straight-line
cutting results
Self-aligning aluminum fence locks firmly into position on the
Bandsaw Table with a twist of the Handle and a fiip of the Locking
Lever. Adjusts from “0” to 5" from Blade. Accepts Fence mounted
accessories such as Flip-Up Stop, T-Track mounted Utility Light and
Featherboards. For use on Shopsmith Bandsaws with aluminum
tables only (shown here).
555645
Bandsaw Fence
$95.86
B.
Table Extension adds 11
1
/
2
" of outboard Bandsaw Table
support for improved workpiece control and precision
Slides into the twin Mounting Holes in the edge of your aluminum
(only) Shopsmith Bandsaw Table to provide loads of extra support,
as well as a Mounting Platform for the Bandsaw Circle Cutter (C)
listed below.
555488
Bandsaw Table Extension
$25.77
C.
Circle Cutter helps you create perfectly round circles
in a fiash with your Bandsaw
Just attach to the Bandsaw Extension
Table (B. above) and pivot your work-
piece from above or below the table
as you cut perfect circles from 2"
to 36" in diameter. Requires
Extension (555488)
555489 Bandsaw Circle Cutter $36.24
555668
Complete Bandsaw
$133.98
Accessory Pkg.
(Includes A, B & C above)
YOU SAVE $18.00
Eccentric Tubes let you
raise your MARK V to
vertical while Bandsaw
is mounted on end
Designed to offset your Bandsaw
in the MARK V Mounting Tubes
just enough to allow you to raise
the MARK V to Drill Press posi-
tion without having to remove the
Bandsaw from its Mount.
555626
Bandsaw
$40.44
Eccentric Tubes
See Pages 29 & 32
Make your Blades last
longer by occasionally
replacing the Tires
on your Bandsaw
Eliminate vibrations and ensure
proper Blade tracking. Includes
instructions.
555644 Bandsaw
$19.99
Tire/Adhesive Kit
518108 Bandsaw
$11.99
Tire (only)
Protect your Bandsaw with
a custom-fitted Dust Cover
This rugged,
cotton/ poly-
ester Cover is
custom-sewn
to the shape of
your Shopsmith
Bandsaw. The
special urethane coating repels
moisture while a unique perforation
process allows any moisture that
might get in from below to escape,
preventing rust and corrosion.
517000 Bandsaw
$23.57
Dust Cover
Urethane Bandsaw Tires
install without glue,
improve tracking
performance and outlast
conventional rubber tires
The new Shopsmith Bandsaw
Cover allows you to see when
adjusting your blade tension
without ever having to remove the
cover! It also has an arrow to
take the guess work out of which
way your blade should run. The
Shopsmith logo is in the mold, so
there’s no sticker to get scratched.
522221
Bandsaw
$61.27
Cover
Adjust Bandsaw Blade
tension instantly with
out removing the Cover
Cool Blocks‚ extend Blade life
Cool Block Blade Guides are made of a special, non-
metallic material that lubricates your Bandsaw Blades
as they cut, keeping them cool and reducing the
chance of premature breakage. And, since they won’t
damage Blade teeth, you can really snug them down
for added stability when working with smaller blades.
Required if you’re using our 3/32" Blade (556261).
555374
Cool Blocks Blade Guides
$19.24
5556262
Kit, including Cool Blocks
$41.48
and 3/32" Blade (556261)
YOU SAVE $4.61
Bandsaw Accessories
These bright orange Tires have
been manufactured to our exact-
ing specifications for use with the
Shopsmith Bandsaw. Made from
a special urethane compound,
they will improve blade tracking
(especially with smaller blades)...
repel sawdust build-up... and
provide added durability over our
standard
rubber tires.
To install, submerge in hot
(125° – not boiling ) water for
about 15 minutes to soften
them... and stretch them onto
your Bandsaw wheels.
No glue is
required.
The “welds” on these Tires are
guaranteed for life. If they should
fail, simply return them to the
manufacturer for a replacement.
Includes two Tires.
522458
Urethane
$35.99
Bandsaw
Tires