Specifications

69
1-800-543-7586
C
A
D
B
While the Molder produces great straight-line
cuts in the surfaces of workpieces ... and the
Dado is the tool to reach for when you need
square-edged dadoes or grooves ... the Shaper
is best for decorating edges or making edge
joints on straight or curved edges.
In fact, Rub Collars and Starting Pins let the
Shaper tackle irregular shaped edges as easily
as regular ones. PLUS – the Shaper even lets
you work on the inside edges of cut-outs such
as round or oval picture frames.
And, like its Molding cousin, it’s a great
choice for producing specialized joints such as:
glue joint; tongue-and-groove; cabinet door panel
joints; drop leaf table edge joints; and more.
Complete Shaping Package gives you
loads of versatility at a nice savings
The Shopsmith Shaping Package includes:
• Shaper/Drum Sander Fence Kit *
• Shaper Table Insert *
• (555117) Shaper Arbor with Collars
• (505608) 1/4 ˝ & 1/2 ˝ Combo 1/4-Round
Cutter
• (505934) Flute & 1/4-Round Cutter
• (505618) 3/16 ˝ Bead & Cove Cutter
• (555078) Door Panel Shaper Cutter
• (555079) Door-Rail Coper Shaper Cutter
555170 Shaping Package $289.77
(Model 500)
555141
Shaping Package $289.77
(Models 505, 510 & 520)
YOU SAVE $19.32
* For your MARK V Model
A. Shaper/Drum Sander Fence Kit – Includes
independently micro-adjustable (to 1/64˝)
infeed/outfeed Fence; Shield; Quill-mounted
Featherguard; Table-mounted Featherboard;
and Vacuum Attachment.
555144 Shaper/Drum $150.84
Sander Fence Kit
(Model 500)
555113
Shaper/Drum $150.84
Sander Fence Kit
(Models 505, 510, 520)
B. Table Inserts – Rigid cast aluminum with
2
1
/4˝ diameter circular cutout and two screw-
in Starter Pins. Accepts Vacuum Attachment.
505509 Shaper/Drum $27.71
Sander Table Insert
(Model 500 – not shown)
555122
Shaper Table Insert $27.71
(Models 505, 510, 520)
C. 1/2 ˝ Shaper Arbor – Includes four Rub
Collars (25/32˝, 1˝, 1
1
/4˝ and 1
1
/2˝).
555117 1/2˝ Shaper Arbor $35.79
D.
Shaper/Router Shield – See-through Shield
clamps around the MARK V Quill with a single
setscrew and provides both front eye protec-
tion and a rear brush that can be adjusted to
meet the top of the Fence or your workpiece
for added dust collection efficiency.
555373 Shaper/Router Shield $22.27
Over or under-table
Shaping?
With the Shopsmith MARK V Woodworking
System, you have the choice of performing
your Shaping operations from above the
Work Table surface or below it.
The Shaping Package, shown at left, is for
those who prefer the over-table approach to
Shaping. Using this approach, the up-down
depth-of-cut is controlled by your MARK V’s
Quill and your speed is limited to the
MARK V’s maximum 5,200 rpm. As a
result, your final cut may not be as smooth
with over-table Shaping.
The Shopsmith Speed Increaser
See Page 32 allows you to perform under-
table Shaping operations at 10,000 rpm’s.
At this speed, you’ll usually achieve a
smoother final cut than with over-table
Shaping. Using this approach, depth-of-cut
is controlled by the up-down motion of your
Work Table. Our Adjustable Stop Collars
See Page 87 will help you make more
finite adjustments.
A few examples of how you
can combine Cutter profiles
to create special shapes
The numbers inside the Cutter shapes in the
below illustrations correspond to the numbers
next to each Cutter profile on page 51.
Drop Leaf Tables
Picture Frames
Table Edges
Shaping
The Shopsmith Shaping Package – Helps you create
beautiful decorative trim on curved or straight edges
Screen Mold