Specifications
47
1-800-543-7586
Full-featured Router Table Kit fits
on the end of your MARK V
AB C DE G H I JF
Routing is an accurate way to cut, shape, mold,
mortise, duplicate and form intricate, profes-
sional-looking joinery. Made of tough carbide to
Shopsmith’s specifications, the bits are designed
to hold their razor-sharp edges up to 10 times
longer than high-speed steel bits. It’s best to
make several light passes through the wood.
One deep cut could splinter the wood at the
end of a cross-grain cut. If possible, leave extra
stock on the workpiece so any splintered area
can be cut away. Making all cross-grain cuts
first helps avoid splinter problems. Work the
wood at an even steady pace. Too slow, the
wood will burn – too fast and the motor will
labor and the cut will not be smooth.
All of
these Bits feature 1/4
˝
shanks and are designed
for use with the (514632) Shopsmith 1/4
˝
Router Chuck.
See Page 44
A. “3-in-1” Router Bit routs out plates,
trays or boxes
Cuts a straight side up to 1
1
/4˝ deep with
a radius of 1/8˝ and 7/16˝ width. Makes
smooth rounded corners, and shapes a
perfectly flat bottom – all in a single pass!
Finest industrial grade, high-speed carbide.
All bits have 1/4 ˝ shank
555407 3-in-1 Router Bit $23.29
B.
Beading
555230 1/4 ˝ Beading $27.59
555238 3/8 ˝ Beading $28.69
C.
Chamfer
555234 45° Chamfer $20.99
D.
Cove
555228 1/4˝ Cove $27.59
555224 1/2˝ Cove $33.09
E.
Dovetail
555235 3/8˝ – 9° Cutting $8.79
Angle
555237 1/2˝ – 14° Cutting $9.99
Angle
F.
Reversible Stile and Rail Bit does the job
of two separate bits
Cuts both the stile and rail pieces for door
panel framework. Match up stile cuts with
rail cuts by removing the locking nut and
changing the profiling cutters and bearing.
We include shims to assure perfect alignment.
Recommended for use on 3/4˝ stock.
1
1
/2˝ diameter x 3˝ long.
555380 Reversible Stile $69.59
and Rail Bit
(1/2-inch Shank)
G.
Roman Ogee
555231 5/32˝ Roman Ogee $29.79
H.
Round Over
555229 1/4˝ Round Over $25.39
555223 3/8˝ Round Over $30.89
555244 1/2˝ Round Over $33.09
I.
Slot Cutter & Rabbeting
555246 1/4˝ Slot Cutter $18.79
555233 3/8˝ Rabbeting $20.99
J.
Straight
555222 1/4˝ Straight $12.19
555277 3/8˝ Straight $12.19
555232 1/2˝ Straight $13.19
555236 3/4˝ Straight $13.19
“T-Slot” Bit cuts keyhole-shaped slot
for hanging plaques/frames
Cuts a slot that lets the head of a screw or nail
slip into the bottom or one side and slide along
a 1/4
˝
slot. Forms a 1/4
˝
wide slot and a 3/8
˝
diameter keyhole. Cuts up to 5/8
˝
deep.
Carbide tipped.
555406 T-Slot Router Bit $19.79
Retro-Fit Router Table Fence
and Hardware
Standard on Routing Systems purchased after
8/28/89. Includes Fence, Hardware and Knobs.
515511 Adjustable Fence $36.76
and Hardware
Carbide Router Bits
Router Table Upgrade
Enjoy super-smooth cuts and long-lasting
durability with these premium-quality
Shopsmith Carbide Router Bits
Just drop the twin Mounting tubes into the
Extension Table mounts on your MARK V, install
and adjust the single Telescoping Leg on the
opposite side and you have the foundation for
a great Router Table.
The 23
3
/4˝ x 18˝ laminate-covered table top
features a drop-in center insert (with leveling
shims), to which you attach your router motor’s
base. Its inlaid aluminum T-Slot miter gauge
channel will accept the MARK V Miter Gauge
or Featherboards and can be easily adjusted
for a snug fit.
A series of threaded inserts in the table’s
surface accept the independently adjustable
two-piece Fence which can be locked into
position with comfortable 3-wing knobs. Travel
slots in the Fence faces allow the attachment
of shop-made faces.
The Router Guard offers a large 2
1
/2˝ dust
collection port on top and an adjustable brush
on the back side to contain and direct dust
and debris.
The large table surface also makes an
excellent auxiliary support table for other
MARK V operations. Includes the Router Table,
Extension Table Base, one Telescoping Support
Leg, Router Guard (with built-in dust pickup),
Guard Support Assembly and Fences. Can also
be mounted on the Power Station.
The MARK V Router Table requires a separate
router motor. The router motor must not exceed
3 hp. The router base must be round and not
exceed 6
1
/2˝ in diameter.
555658 Router Table Kit $285.37