Specifications

46
www.shopsmith.com
Table Surface
Accepting virtually any hand-held router motor,
it can be used as a “floating table” between
your MARK V’s Work Table and Extension Table,
or as an outboard unit, supported by your
Extension Table and Telescoping Legs.
Made of 1
1
/4˝ thick double-refined MDF
(medium density fiberboard), all surfaces are
laminate-covered for durability and smooth-
gliding action.
Mounting Plate
The patented Woodhaven
Mounting Plate comes
with a blank insert, a
2˝ hole insert, a 1˝ hole insert with a 1
3
/16˝ diam-
eter bushing counterbore, a 1/2˝ diameter nylon
starting pin, and complete with instructions and
mounting hole diagrams for 37 popular router
motors.
The Plate is supported by four, Woodhaven
Stay-True Plate Levelers
™
that can be adjusted
to provide snag-free gliding action.
Adjustable Fences
Each of the two rugged, extruded aluminum
Fences mount quickly and independently with
twin knobs to the T-Track in the top of your
Pro Fence System Rip Fence.
Each Fence offers more than enough left/
right travel providing the ideal bit clearance for
optimal workpiece support ... whether you’re
working with a 1/8˝ diameter straight bit or a
giant, 3˝ or larger diameter panel-raising bit.
The in-out position of each fence half is
controlled by turning a large, four-wing adjust-
ment knob. Each 1/4-turn provides a
precise, 1/128˝ of micro-adjustment.
A shatter resistant, see-through upper
guard provides eye protection and helps
seal off the gap between
the two fences for added dust collec-
tion efficiency.
Connect the vacuum port on either
half of the fence to a 2
1
/2˝ diameter
hose for super-efficient dust collection. A 2
1
/2˝
elbow is included (and required) for attaching
the hose to either of these ports.
555865
Pro Fence Router
$539.99
Table System
555995
Router Table
$345.65
521963
Router Fence
$304.88
Optional Accessories
A.
Router Table Guard – Use when freehand
routing or using bits with bearing pilots.
Includes: See-through Guard, screw-in
mounting post and bracket and integral,
dust port.
515704
Router Guard
$66.14
B.
Router Table Featherboards – Attach
to threaded inserts in Table surface to
hold stock against Fences during straight
line routing.
Includes: (2) Featherboards, (4) knobs
and (4) washers.
555878
Featherboards
$26.06
C.
On-Off Switch – Attach to the underside of
your Router Table and then plug your router
motor into it. Eliminates fumbling for your
router motor’s switch during operations.
555877
On-Off Switch
$44.74
D.
Rip-Fence Featherboard – Attaches to the
top of your Router Table Fence for use as
a hold-down during straight-line routing.
555783
Rip-Fence
$22.55
Featherboard
E.
Dust Collection Elbow – 2
1
/2˝ Elbow allows
you to attach a DC3300 Dust Collection
Hose to each end of your Router Table’s
Fences for even greater efficiency.
514521
2
1
/2˝ Elbow
$7.39
F.
Fence Light Kit – Includes a Shopsmith
Utility Light (555503) and special bracket
for mounting to the T-Track in the top
surface of Router Table Fences.
555806
Light w/Bracket
$71.30
521787
Bracket only $22.22
A
B
C
D
E
F
Pro Fence Router Table System
Enjoy unrivaled precision and dust collection efficiency with our
micro-adjustable, two-piece Pro Fence Router Table System