Specifications

42
www.shopsmith.com
Super-small to super-large – Incra’s MiterSled 5000 gives you optimal workpiece control
The MiterSled 5000 combines incremental angle control features with a
3-panel laminated Sled and, a longer fence for the ultimate miter cutting
workstation for your Shopsmith MARK V Models 505, 510 or 520/Pro
Fence table saw. The Sled consists of three laminated MDF panels with
two embedded aluminum T-tracks for securing an included workpiece
hold-down clamp. A renewable right panel provides zero clearance tear-
out control and cut-off support on both sides of the blade.
You get absolute rigid support for the 36˝ to 64˝ telescoping Incra LOCK
Cut-off Fence. You can crosscut a 25˝ wide board on your MARK V with
full control.
Whether it’s your basic 90° cut-off, simple picture frames, complex
compound miters, or a 20-sided object, the MiterSled 5000 delivers
perfect repeatable accuracy – the first time, every time and with any
angle. The precision angle indexing teeth allows 364 positive angle stops
in 1/2° increments over a full 90° range. It is continuously adjustable
between 1/2-degree steps.
Includes: The MiterSled 5000; 36˝ IncraLock Flip-Fence with Dual-Arm
Flip-Shop Stop Positioner telescopes to 64˝; Incra Protractor and 3-piece
MDF laminated Sled.
Features
• 364 positive angle stops
• 1/2° increments
• Special stops at 22
1
/2° and 67
1
/2°
• GlideLOCK Miter Bar with 10 expansion points
• AngleLOCK 36˝ IncraLOCK Flip-Shop Stop Fence telescopes to 64˝
• INCRA FLIP Shop Stop Positioner 3-panel laminated SLED ... you’ll
easily achieve mitering accuracy you never thought possible.
522163A
Incra MiterSled 5000
$352.79
Fits MARK V Models 505, 510 & Model 520/Pro Fence
The Incra MiterSled 5000 is a Special Truck Shipment item and requires
an additional $10 shipping fee.
Incra
®
Miter Gauge/Miter Sled