Specifications

6
www.shopsmith.com
Anniversary / Model 505
to Model 520 Upgrade
Enjoy increased workpiece support
and precision with the Pro Fence
System Table Upgrade Kit
The Model 520 Table System Upgrade gives you
everything you need to step your Anniversary
MARK V with Model 505 Table System up to
the super-versatile workpiece support system
and enhanced Rip Fence of MARK Vs with the
Model 520 Table System.
You’ll get the professional-duty Pro Fence with
Direct-Reading Scales, two Floating Extension
Tables, plus Connector Tubes and Telescoping
Legs to tie it all together into a System that will
deliver optimum workpiece support.
Here’s what you get with the Model 520
Table System Upgrade Kit:
• Larger Rip Fence is 24
1
/2˝ long x 2
1
/2˝ thick
with dual T-Slot Tracks on the top surface
and a T-Slot Track on each Face.
• (2) New Direct-Reading Rip Fence Scales .
You get two magnetic,
stainless steel Scales, one 45˝
long and one 16˝ long. Bottom Page 5
• New, wider Fence Straddler .
• (8) New Rails for Main and Extension Tables .
• Two Floating Extension Tables slide on
Connecting Tubes and lock anywhere you
want them.
• Four 27 ˝ Connecting Tubes slip through
the Rails and tie the System together with
locking Knobs.
• Two Telescoping Legs give added support.
A quick twist locks their height.
• All required fittings and hardware .
• Instruction Manual .
• (2) special Set-Up and Alignment Gauges .
555986
Model 505 Pro Fence
$691.67
& Table Upgrade
Rip Fence Upgrade for Model 500
MARK V's offers T-Slot top surface
and single Lever locking mechanism
The convenient T-Slot on the Fence’s top
surface accepts our:
• Rip Fence-Mount Featherboard,
555783 - Pg. 29
• Flip-Up Rip Fence Stop,
555808 - Pg. 76
• T-Track Utility Light Bracket
521787 - Pg. 76
• or shop-made fixtures using our
Sliding T-Nuts,
514491 - Pg. 36
The single, flip-up Lever locks both the front
and the back firmly to the Work Table in one
simple action. Also works with the original
as well as the wider (555084 or 555085)
Model 500 Extension Table.
555646
Rip Fence
$117.20
Two upgrades bring added dust
collection efficiency and safety to
your MARK V
A.
Lower Saw Guard Upgrade for MARK V’s
with serial numbers below 222396
This is the Upgrade you want if you have a
plastic Lower Saw Guard with a 1
1
/4˝ dust
collection port. Provides dual 2
1
/4˝ ports
for more efficient dust collection. Some
drilling and tie bar modifications required.
555294 Lower Saw Guard
$55.90
Upgrade
B.
For older model MARK V’s with aluminum
Upper and Lower Saw Guards
This is the Upgrade you want if you have
aluminum Upper and Lower Saw Guards
with a 2
1
/4˝ dust port. You’ll get the Dual Port
Lower Guard plus the See-Through Upper
Guard with anti-kickback Fingers. Some drill-
ing and tie bar modifications required.
505875
Model 500 Clear
$227.87
Saw Guard System
C.
For older model MARK V’s with Poly-V-Belt
Drive System
Earlier Model 500 MARK V’s were
produced with a single bearing Quill
that could generate runout and wobble
that will jeopardize the precision of your drill-
ing, turning and other operations. This dual
bearing Quill will solve that problem
and improve your results on virtually every
project. Installs easily, in less than an hour,
by following the detailed instructions.
555088
Model 500 Two-Bearing
$127.69
Quill Upgrade
D.
7
1
/2 ˝ wide Model 500 Extension Table is
nearly double the width of original Tables!
Increases Table size from 4
1
/4˝ wide to
7
1
/2˝ wide, providing added support for
many operations and up to 4
3
/4˝ of
on-table Rip Fence adjustment. Offset
mounting extends ripping capacity even
further. Order as a complete Table with
Down Tubes – or save and order as a
Top-Only version that can be mounted
to your existing Model 500 Down Tubes.
555084 Model 500 Extension $142.88
Table Upgrade
555085
Model 500 Extension
$79.56
Table (Top Only)
A
B
Add the (2) Floating Tables, (4) Connector Tubes
and (2) Telescoping Legs and (2) T-Joint Leg
Fittings to upgrade your Anniversary MARK V
with Model 505 Table System to the Model 510
Table System
555137
Model 510 Extension
$289.14
Table Upgrade
MARK V Model 500 Upgrades
MARK V Upgrades
Model 510 Extension Table Upgrade
for Anniversary MARK V’s with
Model 505 Table System
C
D