Specifications

39
1-800-543-7586
A
B
C
E
Keep all of your woodworking, garden and household
cutting tools true and sharp with the Shopsmith Grind-
ing Wheel Guard
You don’t have to be an experienced wood-
worker to know that you need sharp tools to
achieve the best results with the least effort.
Lathe chisels, bench chisels and plane irons
all have cutting edges that need to be sharp-
ened periodically to work properly.
Shopsmith’s Grinding Wheel Guard attaches
to your MARK V allowing you to grind or hone
all types of edged tools. You can also use it
Sharpening Necessities
F. Honing Oil cleans and lubricates your
Sharpening Stones – Floats off metal and
abrasive particles that could clog the stone
and impede its performance.
517064 Honing Oil (4 oz.) $6.59
G.
Versatile, all-purpose Bench Stone – Two-
sided India Benchstone offers medium and
fine grit surfaces for all-around sharpening.
8˝ x 2˝ x 1˝.
731040 Combination Stone $27.81
H.
Hard Arkansas Slip Stone – The top
choice of the old-timers for final honing
to a keen edge.
516092 Hard Arkansas Slip $17.59
I.
Tapered, Fine India Slip Stone – The
best choice for honing Gouges and other
curved-edge Chisels.
731029 Tapered India Slip $27.81
F
G
H
I
Control precise sharpening and
honing angles with this English
Honing Guide
The best of all the Honing Guides we’ve tried.
Just clamp your Chisel or Plane Iron into the
Guide to establish the correct angle, then roll
it back-and-forth over your Sharpening Stone
to hone any edged tool from 1/8˝ to 2
5
/8˝ wide.
Includes instructions for use and setting proper
bevel angles.
730440 English Honing Guide $11.99
D
to restore the performance of screwdrivers,
punches, garden tools, mower blades and
more – and perform a wide range of general,
in-shop grinding jobs.
Its versatile tool rest can be adjusted and
locked firmly into any angle up to 90° with
a quick twist of the oversized wing nut. Use
the rest in a vertical position with edges that
surround the wheel when sharpening chisels
and narrow edged tools – or in a horizontal
position for supporting wide plane irons.
The clear, see-through shield and spark
guard are both fully adjustable to provide
maximum protection for every set-up.
It attaches quickly and easily to the quill
of your Shopsmith MARK V. Use only with
Shopsmith 5˝ Grinding Wheels (not included).
Includes: Grinding Wheel Guard, See-
Through Shield with Spark Arrestor and
5/8˝ Grinding Wheel Arbor.
A. 555470 Grinding Wheel $69.39
Guard
B. 555302 5/8˝ Grinding $26.66
Wheel Arbor
Grinding Wheels
C. 517475 Grinding Wheel $23.19
Fine – 100-Grit
D. 517474 Grinding Wheel $23.19
Coarse – 60-Grit
E. 517473 Grinding Wheel $23.19
Very Coarse – 36-Grit
Sharpening/Grinding