Specifications

38
www.shopsmith.com
Sharp Chisels work best – and this
handy Guide takes the guesswork
out of keeping them that way
This Guide gives you the easiest way ever to
put a razor’s edge on your Lathe Chisels,
Bench Chisels and Shaper Cutters.
As you know, sharp tools can make a major
difference in the quality of your projects. Now,
Shopsmith has a solution for achieving those
super-sharp edges quickly and easily ... even
if you’ve never had good luck with sharpening.
Just mount the Guide to your MARK V’s
Work Table or Extension Table (instructions
included), adjust for the proper pre-set edge
angle and go to work. If you want a different
angle, simply re-set it to the personalized bevel
angle that meets your requirements.
The comprehensive Manual provides
detailed mounting and sharpening instructions,
so you just can’t miss. Includes:
• Shopsmith Sharpening Guide
• 12˝ Steel Sanding Disc
• 12˝ Cloth-backed Sandpaper
(3 pcs. 150-grit Aluminum Oxide)
• Step-by-step Instruction Manual
555193
Sharpening Guide Pkg.
$104.66
YOU SAVE $21.97
555204
Sharpening Guide (only) $52.77
555143
12˝ Steel Sanding Disc
$55.60
Replacement Sandpaper Discs
for the Sharpening Guide:
555205
100-Grit, Alum. Oxide (3)
$18.26
555206
150-Grit, Alum. Oxide (3)
$18.26
NOTE: Although the Sharpening Guide is specifically designed for
use with Shopsmith Lathe Chisels, other brands or types of chisels
may also be sharpened with it, as long as Lathe Chisel blades are at
least 4 ˝ long and Bench Chisel blades 6 ˝.
Brass Bevel Gauge helps you achieve
11 precision angles when grinding or
sharpening Chisels
This compact, 1
3
/4˝ diameter Gauge includes
the most common sharpening angle for Chisels,
plus a 120° gauge for drill bit tips. Angles
include 15°, 17.5°, 20°, 22.5°, 25°, 27.5°,
30°, 32.5°, 35°, 45° and 60°.
521808
Bevel Sharpening Gauge
$8.81
Planer/Jointer Knife Sharpener will
keep you in business in the event of
a nick or dull Blades
Nicked Knives on your Planer or Jointer can
spoil the appearance of your projects and cost
you hours or days of delay as you sand out the
blemishes they’ll leave – or wait while you send
your Blades out to the sharpening service.
But now, this easy-to-use Sharpener will
save you the time that could be required to
sand out the nicks ... or the expense you
could face for sending your Blades out to be
professionally sharpened.
Just clamp your Knives into the self-aligning
Jig, grasp the two large Handles and use your
Shopsmith Conical Sanding Disc to sharpen
them to a keen edge.
Special nylon glides on the back and bottom
edges ensure the Guide’s smooth travel over
your MARK V Tabletop and against your Rip
Fence as it holds your Knives at the precise,
correct angle while you sharpen them.
This is truly the simple, foolproof way for you
to keep your Jointer and Planer operating at
peak performance ... no matter what happens.
Includes complete step-by-step instructions
for set-up and use.
555471
Planer/Jointer
$74.83
Knife Sharpener
Conical
Sanding
Disc
See Page - 73
The guys at work are sure tired of me
talking about my Shopsmith. Thanks
for my MARK V.
~ T. Wilson, Borger, TX
✍
Sharpening
The Shopsmith Sharpening Guide – and Planer/Jointer Knife Sharpener
Two fail-safe ways to put a razor’s edge on your Chisels, Machine Knives and Shaper Cutters