Specifications

See the Table on Pg. 3 for a comparison of
MARK V Model Features and Specifications
5
1-800-543-7586
• Two Floating Extension Tables
slide on Tubes and lock anywhere
between the Main
Table and the
end Extension
Table.
• Four 27 ˝
Connecting
Tubes go through the Rails and tie the
System together with locking Knobs.
• Two Telescoping Legs give added support in
the middle or at the ends of the Connecting
Tubes. A quick twist locks their height.
• See-Through Upper
Saw Guard with etched-
in depth-of-cut indicators,
Anti-Kickback Device
and Riving Knife.
• New Lower Saw Guard , updated to
accommodate Shopsmith’s 12˝ Sanding
Disc. Includes 2
1
/2˝ dust port.
PLUS ... You’ll also get:
• A new Two-position Lathe Tool Rest Arm
Go from this ...
If you own a MARK V Model 500 and have been
wanting a larger, more expandable Table and
Fence System for added support and precision
when working with large stock – yet have little
use for the jigging and fixturing capabilities
of our Model 510 Table System – this is the
Upgrade for you.
As with the Pro Fence System Upgrade on
Page 4, you’ll have over 8˝ of table width for
handling even the longest boards! That’s almost
twice the 56˝ your Model 500 machine offers!
Inside the Model 510 Table System
Upgrade Kit:
• Larger Table with
big 17
1
/
2
˝ x 22 ˝ work
surface. More support
for ripping large sheets
and crosscutting long boards.
• Larger Rip Fence is 24
1
/2˝ long x 1
3
/8˝ thick
with a single T-Slot track on the top surface
for mounting accessories such as:
– Rip Fence-Mount Featherboard,
555783 - Pg. 29
– T-Track Utility Light Kit,
555806 - Pg. 76
– Flip-Up Rip Fence Stop,
555807 - Pg. 76
A large Butterfly Handle locks the infeed end
while a single Lever locks the outfeed end
with a quick flip.
• New Table Carriage with
dual Tilt Locks at the
front and rear and a
widened tube stance for
added stability. Quarter-
turn Hand Wheel and
Lock move the table up and down – then
secure it where you want it.
with lever-style Adjustment Screws
and anti-rotation Post.
• A new Saw Table Insert.
• Larger Extension Table Top (does not
include vertical mounting tubes).
• New steel Miter Gauge Bar with T-Slot Washer.
• A Special Sanding Disc Hub lets you use your
old style steel Disc with the Lower
Saw Guard.
• A new Pro Fence System 1
1
/4˝ dia. Saw Arbor.
• All required fittings and hardware.
• Instruction Manual, fully describing
alignment, maintenance, safety, tips
and techniques.
555142
Table System
$1,196.89
Retro-Fit Kit
Important Note: Due to the increased size of the
Model 510 Work Table and how various accessories
connect to it, some earlier Model 500 accessories may
not fit the Model 510 upgrade. These include (but are
not limited to) all Table Inserts, Front Table Extension,
Rip Fence, Mortising Hold-Downs and some Saw Arbors.
The Shopsmith Model 510 Table System Upgrade
is a Special Truck Shipment item and requires
an additional $20 shipping fee.
... to this!
Enjoy improved workpiece support and control with this Model 510 Upgrade Package for older Model 500 MARK V's
Add Direct-Reading Rip Fence Scales and a more versatile Rip Fence to your MARK V with the Model 510 Table System
The Model 520 Table System Upgrade has
been engineered to give you even better preci-
sion, control and quality performance than you’ve
come to expect from your MARK V with the
Model 510 Table System. The professional-duty
Fence features two interchangeable stainless
steel Scales for direct-reading of rip cut widths
... plus ... twin locking Levers ... one for the
infeed end of the Fence and another for the
outfeed end to ensure a positive, precise fence
lock-down, even when working with large and/
or heavy workpieces. It drops straight down onto
the fence rails without tipping or fiddling, then
slides along the Rails on high-tech glides.
Inside the Model 520 Table System Upgrade Kit:
• Larger Rip Fence is 24
1
/2˝ long x 2
1
/2˝ thick
with dual T-Slot Tracks on the top surface and
a T-Slot Track on each Face for mounting
accessories such as:
– Rip Fence-Mount Featherboard,
555783 - Pg. 29
– T-Track Utility Light Kit,
555806 - Pg. 76
– Flip-Up Rip Fence Stop,
555808 - Pg. 76
• New Direct-Reading Rip Fence Scales let you
set rip cut dimensions in an instant
without measurement. Includes two
magnetic, stainless steel Scales ...
one 45˝ long with a “zero-point” 6
1
/2˝
from the left end and 38
1
/2˝ from the
right end – and a second scale 16˝ long with
a “zero-point” 6
1
/2˝ from the left end and 9
1
/2˝
from the right end.
See Page 7
• New, wider Fence Straddler.
• (8) New Extruded Rails for Main and
Extension Tables.
• All required fittings and hardware.
• Instruction Manual, fully describing alignment,
maintenance, safety, tips and techniques.
• (2) Set-Up and Alignment Gauges.
510 to 520
Pro Fence System
555982
For
Model 510 MARK V's $475.69
or
Upgrades – 1986 or later
555983
For
Model 510 MARK V's
$475.69
purchased or upgraded
prior to 1986
MARK V Model 500 to Model 510 Table System Upgrade
MARK V Model 510 to 520 Pro Fence & Table Systems Upgrade
MARK V Upgrades