Specifications

30
www.shopsmith.com
7
1
/
2
˝ wide Extension Table
gives your Pre-1990
MARK V a full
50˝ of ripping
capacity
Supports long boards when
sawing, sanding or boring.
It provides an additional 7
1
/2˝
wide table surface for outboard
support – plus – allows an
additional 4
3
/4˝ of ripping capacity.
Table and fence bar are fully adjustable
for precise alignment with saw table. Offset
mounting offers a full 50˝ ripping capacity
when used with a rip fence on the left side
of MARK V’s made before 1990.
555084
Extension Table
$142.88
With mounting bracket & tubes
555085
Extension Table
$79.56
Top only
Retractable Casters bring extra
convenience and mobility to
all your Shopsmith Tools
A single step on the Pedal raises the Tool 1/4˝
off the ground for easy mobility. A double step
raises it 1/2˝ and a third settles it back onto
the ground. Many customers have even added
these Casters to their work benches and other
shop cabinets.
555354
MARK V Casters
555353
Planer/Power Station/
Power Stand Casters
(For all Shopsmith Special Purpose
Tool Stands, except Scroll Saw)
555457
Stand-Mounted Scroll Saw Casters
$96.43 Each
Imagine having the same kind of extended
workpiece support on both sides of your
MARK V at the same time. This package gives
you exactly that ... and, at a $50+ savings, too!
Includes (2) Floating Extension Tables,
(2) Telescoping Legs, (2) T-Joint Fittings and
(4) Connector Tubes.
555137
Extension Table Pkg.
$289.14
For MARK V’s with Model 505 or 510 Table Pkg.
YOU SAVE $50.03
Individual components available
514446
Floating Extension
$124.01
Table (1)
514439
2˝ Connector Tube (1)
$11.45
514529
Telescoping Leg (1)
$27.78
514520
T-Joint Fitting (1)
$21.41
Telescoping Leg provides added
table rigidity when Hollow Chisel
Mortising or performing other
heavy workpiece operations
Add 7˝ of table depth
to your Pre-1990
MARK V for
crosscutting
wide boards
Attaches to the
front of a MARK V
Model 500 table
with a single-twist knob,
providing an extra-long slot for the miter
gauge and added workpiece support, too.
Brings increased accuracy to wide crosscuts.
Not for MARK V Models 505, 510 and 520
Table Systems.
505626
Front Table Extension
$71.39
5-Foot Connector Tubes provide
additional support when working
with long boards and large panels
These extra-long, 5-foot Connector Tubes slip
easily into the main Work Table or Extension
Table Rails of your MARK V with a Model 505,
510 or 520 Table System.
Add a couple of extra Floating Extension
Tables (514446) and Telescoping Legs
(514529) – shown at left – and you’ll be
able to easily handle the largest panels or
the longest boards for crosscutting (2 tubes).
521942
5-Foot Connector Tubes
$48.54
Double-up your outboard workpiece
support with this Extension Table
Package for MARK V’s with the
Model 505 or 510 Table Package
MARK V Accessories
Enjoy added workpiece support, operating convenience
and mobility with these great MARK V Accessories
HTC Roller Stand
provides the perfect
companion when
working with long
or wide workpieces
Made of sturdy, 1˝ square
steel tubing with a 14˝
wide roller and a wide,
stable stance. Adjusts
from 28
1
/2˝ to 44˝ high.
Front feet are 16˝ apart
and the back foot sits
13˝ back to form an equilateral triangle for
greater stability. Folds for easy storage.
The Shopsmith Support Table is now
a Roller Stand, too! Conversion Kit
available for older Support Tables.
See Page 37
740900
Roller Stand $52.17
Ideal for eliminating Work Table deflection
when machining heavy stock or during certain
Drill Press operations such as Hollow Chisel
Mortising ... where you may be exerting more
downward pressure than normal and need the
extra Table support.
Extends to 42
1
/2˝ and works like your
Telescoping Extension Table Legs. Just slip
the notch in the top of the Leg under the
front Table “lip” and tighten the Knob to clamp
it into position.
555627
Table Support Leg
$35.27