Specifications

22
www.shopsmith.com
Specifications
MARK V Mounted Pro Planer
Maximum width-of-cut 12˝ 12˝
Maximum depth-of-cut 3/32˝ 1/8˝
Maximum stock thickness 4˝ 4˝
Minimum stock thickness 3/32˝ 3/32˝
Cutterhead speed Variable: 3,000 – 4,100 rpm Fixed: 5,750 rpm
Cutterhead diameter 3˝ 3˝
power 1
1
/
8
1
3
/
4
Feed motor horsepower 1/2 1/2
Feed rate (feet/minute) 5 – 12 7 – 20
Electrical requirements 110V, 15 amps 110V, 15 amps
Minimum cuts-per-inch 62 72
Maximum cuts-per-inch 205 205
Table size 12
1
/
2
˝ x 28˝ 12
1
/
2
˝ x 28˝
Weight 64 pounds 151 pounds
Choose the Shopsmith Planer model
that best meets your needs
Planer Dust Chute helps you collect
flying chips and sawdust at their
source
Attaches to Shopsmith Planers (either model).
A real must for those who like to keep a neat
and tidy shop. Includes 2
1
/2˝ Elbow.
300001
Planer Dust Chute
$37.37
Hearing Protector blocks out the
harmful, high-pitched whine of
machines
Lightweight, comfortable Protector filters out the
whine of Table Saws, Planers, Jointers, Routers
and other high-speed tools. Features self-ad-
justing Headband and soft, comfortable pads.
720709
Hearing Protectors
$20.78
Having a spare set of Planer Knives
could keep you working in the event
of a nick or other Knife problem
High-quality, hardened M-2 steel cutting edge
is laminated to a low carbon steel backup. This
provides a keen-edge-holding ability and strength,
without being brittle. Set of three.
505982
Replacement Planer
$109.99
Knives
Planer Knife-Setting Gauge
(not shown)
In the event you’ve lost yours.
513414
Planer Knife-Setting
$5.82
Gauge
Planer-Jointer
Knife Sharpener
Keep your Planer and
Jointer Knives sharp
& performing at their
best. See Page - 18
Custom-fitted Dust Cover protects
your Planer from dust and moisture
Rugged, cotton-polyester cover is custom-sewn
to the shape of your Shopsmith Planer (both
models), features a special urethane coating that
repels moisture while allowing the Cover to breathe.
515305
Thickness Planer Cover $23.57
Planer Pulley Retro-Kit helps older
stand-mounted Shopsmith Planers
produce smoother cuts
For stand-mounted Shopsmith Planers
with two equal-sized pulleys
Increases Cutterhead speed from 3,450 rpms to
5,750 rpms ... and cuts-per-inch by two-thirds
... from 86 CPI to 143 CPI (at 10-feet-per-minute
feed rate) for super-smooth surfaces.
Includes (2) steel (not aluminum) Pulleys, Belt
and unbreakable ABS plastic Pulley Guard, plus
all mounting hardware.
555114
Planer Pulley Retro-Kit
$34.43
Knurled Infeed Roller stops slipping
on older model Shopsmith Planers
For stand-mounted Shopsmith Planers
with serial numbers below 20,000
555115
Knurled Infeed Roller
$52.25
Planer Dust Chute Retro Attachment
For use with all 300001 Planer Dust
Chutes manufactured before 6/1/92
555643
Planer Dust Chute
$28.46
Retro Attachment
Thickness Planer Accessories
Planer Upgrades