Specifications

4
www.shopsmith.com
Your upgrade starts with an expanded table
system that includes a larger Work Table and
Extension Table with two Floating Support Tables
and a pair of Telescoping Support Legs. Put it all
together and you’ll have over 8˝ of table width
for crosscutting even the longest boards!
To this, it adds the heavy-duty,
factory-aligned Shopsmith
Pro Fence with four T-Slots ...
two on the top and one on each
face ... for attaching jigs, fixtures
and aids such as our:
• Rip Fence-Mount
Featherboard,
555783 - Pg. 29
• T-Track Utility Light Kit,
555806 - Pg. 76
• Flip-Up Rip Fence Stop,
555808 - Pg. 76
... or any shop-made jig or fixture you might
build that mounts to the Fence sides or top
using our Sliding T-Nuts, 514491 - Pg. 36
Here’s what you get with the Pro
Fence and Table System Upgrade Kit:
• Larger Table with big 17
1
/2 ˝ x 22 ˝ work
surface. More
support for ripping
4˝ x 8˝ plywood
sheets and cross-
cutting even the
longest boards.
• Pro Fence is 24
1
/2˝ long by 2
1
/2˝ thick with
a double T-Slot track on the top surface plus
another T-Slot on each side for attaching
accessories, jigs and fixtures. Two Levers
lock it rigidly to the front and rear of the
Main or Extension Table with a quick flip.
It also includes a wider Fence Straddler.
• New Table
Carriage with
dual Tilt Locks
at the front and
rear of the Table
and a widened
tube stance for added stability. Quarter-turn
Hand Wheel and Lock move the table up and
down – then secure it where you want it.
• Direct-Reading Rip Fence Scales let you read
and instantly set the width of rip cuts up to
38
1
/2˝ wide. Includes two interchangeable
stainless steel Scales that are graduated in
both 1/16˝ and 1/32˝ increments.
See the bottom of Pg. 5 for more information
Go from
this ...
... to this!
• Two Floating Extension Tables slide on
Connecting Tubes
and lock any-
where between
the Main Table
and the end
Extension Table.
• Four 27 ˝ Connecting Tubes slip through
the Rails and tie the System together with
locking Knobs.
• Two Telescoping Legs give added
support in the middle or at the ends
of the Connecting Tubes. A quick twist
locks their height.
• See-Through Upper Saw Guard with etched-
in depth-of-cut
indicators,
European-style
Riving Knife
and Anti-
Kickback Device.
• New Lower Saw
Guard , updated to
accommodate Shopsmith’s 12˝ Sanding
Disc. Includes 2
1
/2˝ diameter dust
collection port.
State-of-the-art features and capabilities deliver improved working convenience, precision and operator safety
PLUS ... You’ll also get:
• A new, Two-position Lathe Tool Rest Arm
with lever-style Adjustment Screws.
• An anti-rotation Tool Rest Post.
• A new Saw Table Insert.
• New steel Miter Gauge Bar with T-Slot
Washer.
• Larger Extension Table Top (does not include
vertical mounting tubes).
• A Special Sanding Disc Hub lets you use
your old style steel Disc with the Lower
Saw Guard.
• A new Pro Fence System 1
1
/4˝ diameter
Saw Arbor.
• All required fittings and hardware.
• Instruction Manual, fully describing
alignment, maintenance, safety, tips
and techniques.
• (2) Set-Up and Alignment Gauges.
555985
Pro Fence & Table
$1,321.68
System Upgrade
Important Note: Due to the increased size of the
Pro Fence System Work Table and how various
accessories connect to it, some earlier Model 500
accessories may not fit the Pro Fence upgrade. These
include (but are not limited to) all Table Inserts, Front
Table Extension, Rip Fence, Mortising Hold-Downs and
some Saw Arbors.
The Shopsmith Model 520 Table System Upgrade
is a Special Truck Shipment item
and requires an additional $25 shipping fee.
Please call Tech Support TOLL-FREE at
1-800-762-7555 for more details.
Pre-December, 2004
Model 520 Owners
Add the New
Direct-Reading scales
to your MARK V –
see Page 7
See the Table on Pg. 3 for a comparison of
MARK V Model Features and Specifications
MARK V Model 500 to 520 Pro Fence & Table Systems Upgrade
MARK V Upgrades