Specifications

SPECIFICATIONS
Arm style Parallel action Parallel action Parallel action
Throat capacity 20˝ 20˝ 20˝
Table size 16˝ x 23
1
/
2
˝ 16˝ x 23
1
/
2
˝ 16˝ x 23
1
/
2
˝
Table tilt 45° left & right 45° left & right 45° left & right
Max. depth-of-cut 2˝ (wood) 2˝ (wood) 2˝ (wood)
Length of stroke 7/8˝ 7/8˝ 7/8˝
Strokes-per-minute
Variable: Variable:
Two 4-speed ranges*
250 - 1450 rpm 500 - 1450
HI: 265, 395, 675, 990
LO: 190, 300, 475, 700
Blade type required 5˝ plain end 5˝ plain end 5˝ plain end
Drive type MARK V Speed Dial Electron. variable speed Belt & (2) 4-step pulleys
Motor type MARK V Headstock 1/8hp, 115V, 60hz 1/2hp, 115V, 60hz
Switch type MARK V Headstock Safety toggle, recessed Safety toggle, recessed
Weight 62 lbs. 81 lbs. 81 lbs.
13
1-800-543-7586
13
Choose the Shopsmith Scroll Saw Model that
best meets your needs
MARK V
Mount
Free-
Standing
Stand-Mounted
(w/555369 Stand)
* Two speed ranges achieved by swapping Tool and Motor Pulleys.
Three ways to order your Shopsmith Scroll Saw
1.
If you’ll be using your Scroll Saw often, or
plan to take it to craft shows ... our Free-
Standing Model is probably your best choice.
2.
If you’re only going to use your Scroll Saw
occasionally ... or have a limited budget ...
our MARK V Mounted Model is probably
best for you.
3.
If you’re not certain but think you may
eventually want a Free-Standing Model ...
you can always start out with a MARK V
Mount Model now, then order a Power
Stand later as your budget permits.
See Page 26 for Power Stand information
Protect your Scroll Saw with our
custom-fitted Dust Cover
A.
Upgrade your older model Shopsmith Scroll
Saw for super-fast Blade changes
For owners of Shopsmith Scroll Saws
with part numbers 555220 or 555272
Now, you’ll be able to disengage and re-
engage Scroll Saw Blades from the front of
the machine in 10 seconds for super-quick
changes when making multiple internal
piercing cuts – or – to change blades
completely in just 30 seconds!
Tensioning will also be easier, thanks to our
new flip-on, flip-off Lever actuated system.
Plus ... you’ll have a much better view of
your workpiece as you look through the
replacement plastic See-Through Hood.
Kit includes: See-Through Plastic Hood,
Hold-Down Foot/Guard, Rear Tension Lever,
up-front Quick Tension Release Lever and
Quick Change Blade Block System.
555706
Scroll Saw Blade $39.82
Change System
Upgrade Kit
B.
Update your Scroll Saw’s Blade Block
Upgrade Kit
Now, you can quickly install and remove
Scroll Saw Blades from the front of the
machine when making multiple internal
piercing cuts. These new Upper and Lower
Chucks attach directly to the Arms of your
Saw (just like those in the Upgrade Kit
above), and allow you to change Blades with-
out the need for Allen Wrenches or fumbling
with removable Blade Blocks.
Owners of other Model Shopsmith Scroll
Saws who wish to upgrade, should order
the 555706 Kit above.
555708
Scroll Saw Blade
$43.81
Block Upgrade Kit
A
B
Scroll Saw Upgrades
Make your Free-Standing Shopsmith
Scroll Saw portable with these
Retractable Casters
Two-step Pedals lift your Free-Standing Scroll
Saw up 1/4˝ or 1/2˝ off the ground for each
movement, then settle it down for work.
Includes all mounting hardware. NOTE: These
Casters are only for the Free-Standing Scroll
Saw and will not work with 555369 Stand.
555457
Free-Standing
$96.43
Scroll Saw Casters
Scroll Saw Accessories
Our rugged cotton/polyester Cover is custom-
sewn to the shape of your Shopsmith Scroll Saw
(either MARK V Mount, Free-Standing
or Stand-Mount Model). The special urethane
coating repels moisture while a unique perfora-
tion process allows any moisture that might
get in from below to escape, preventing rust
and corrosion.
515308 Scroll Saw Dust Cover
$23.57