Product Manual

2008/4/30 9
Battery and Charging
Steps to charge the Battery
Operating Instruction
1. Must assure the input voltage is between 100V~240V.
2. Must assure the battery to be charged is a LiFePO
4
(Lithium Iron Phosphate Based)
Battery Pack supplied by PMMC.
3. Make sure the power cord, battery cable, and battery terminals are in good condition.
4. Make sure the connecting battery rating is the same as the charger output voltage
(24V).
5. While charging, the charging LED will display a RED light. When the light turns
GREEN, the battery is fully charged.
Charger LED Indication
1. LED (GREEN) – Power On, when not connected to the batteries.
2. LED (RED) – Charging
3. LED (GREEN) – Fully Charged, when connected to the batteries.
Trouble Shooting
1. If the LED light is “OFF” all the time while charging:
Check if the power connections are in good condition. If the LED light is still off all the
time while charging, the battery charger may be malfunctioning.
Please consult your authorized dealer for further assistance.
2. If the LED light does not switch from GREEN to RED when the charging process
begins:
Check if the connection of the battery polarity is correct.
Check if the connection between charger plug and charging port of the battery is
correct.
Check if the battery case is already fully charged.
Check if the battery is functioned properly.
3. The charging time continues for a long duration (Irregular):
Check if the battery is out of order or aged.
4. The battery overheats:
1. Switch your E-Bike off on the main switch of
battery case.
2. Dismount the battery case and then place it at a
ventilated place to be charging.
3. Swivel the charging port cover of battery case and
then connect the charger plug of the charger.
4. Plug the power plug of the charger into secure
power source to start charging battery.
Note: Ensure that the charger plug is dry and
securely connected to the charger port of
battery case.
Power Plug Charger Plug