Product Manual

2008/4/30 8
Battery and Charging
Dismounting Battery Case
Mounting Battery Case
1. Before sliding out the battery
case, make sure the battery
holder latch is at the position
as shown.
2. Switch the key to horizontal
(flat) position. Depress the key
to release the lock and use the
other hand to push the battery
case out from the battery
holder.
3. Remove the battery case.
1. Please secure the battery case holder with one hand
and slide the battery case onto the rail all the way down
to lock the battery case as shown.
Note: If the battery case can be removed without
depressing the key, this means that the battery
case has not been properly locked. Repeat the
above procedures again.
2. The battery case will be locked
and can’t be removed when the
key is in the vertical position.