Product Manual

2008/4/30 7
Regular check for safety before riding
1. Check Tire Pressure
Check the tire pressure of front and rear wheel to be maintained at 50PSI (or 3.5Bar).
Check if the tire tread for wear and replace as needed.
2. Check Power Assist
The power assist will be cut off when one of handbrakes is engaged or the pedaling is
stopped.
3. Check Battery
Check if the battery case fits into the battery holder firmly and the LED Light of the
battery case lights up when the main switch is on at the II position.
Check if the battery is fully charged before use.
4. Check Motor and Control System
Must check the motor and control system are performed well.
5. General Inspection
Check for brake shoes wear and replace as necessary.
Check if the braking function is performed well.
Check if the front and rear wheels are performing smoothly.
Check if all connectors on E-Bike are firmly secured without any damage.
If you have any questions after checking, please refer to the solutions for trouble
shooting (page 16) or contact your authorized dealer for inspection and maintenance.
Cautions for Riding
˙ Always follow the county’s traffic rules while riding.
˙ Check the battery gauge if the charge is sufficient to keep the power assist for your
riding.
˙ Do not keep riding your E-Bike if any problem has occurred. Refer to the solutions for
trouble shooting (page 16) or contact your authorized dealer for further inspection
and maintenance. Ensure to use the spare parts supplied by PMMC for
replacement.
Other Keys to Lifespan
The lifetime of your E-Bike will be adversely affected by exposures to aggressive road
conditions, dirt, rain, water or salt spray. Be sure your E-Bike, including the battery case,
are protected well for transportation and store your E-Bike indoors when not in use.
These steps are essential to prolong the lifespan of product.