Product Manual

2008/4/30 6
The operating instructions of derailleur (Shimano Inter-3 Gear)
The E-Bike is equipped with the Shimano Inter-3 (3-speed gear shifting) at the rear
wheel axle. It is easy to change the gear ratio by shifting the gear-change handle while
riding.
Handle position Riding Gradient Speed / Gear Ratio
3 Level road High
2 Level road with a slight slope Middle
1 At a moderate gradient
Low
(To save your energy while climbing
a slope)
If the derailleur can not be performed with its intended function, please contact your
authorized dealer for adjustment. To shift the derailleur, the steps below should be
followed.
1. Stop pedaling before shifting the gears while riding.
2. Only shift one gear one time while switching the gear-change handle.
3. Resume pedaling.
Note : If you shift the gears without stopping pedaling, a clash may be heard due to gears
shifting over dynamic moving parts.
Adjust saddle height
4. Tighten the clamp lever.
3. Take heed of the maximum height
markings (MIN. INSERTION)
on the tube of the seat.
1. Loosen the clamp lever
2. Adjust the seat post to the
desired position.
|||||||| MIN. INSERTION