Product Manual

2008/4/30 5
User Guidance
10 stages power assist output adjustment
1. Depress the pedal against a wall.
(Do not grab the front or rear brake
lever while depressing the pedal.)
2. Then, press the main switch to
either left (I) or right (II) position
while depressing the pedal.
3. After 10 seconds, the light of controller
will flash as below.
The 1
st
flash means the 1
st
stage.
The 2
nd
flash means the 2
nd
stage.
:
:
The 10
th
flash means the max. (the 10
th
stage)
output from the controller. Release
the pedal at once after selecting your desired
stage.
Note:
※ It’s recommended to set up at the 1
st
stage if riding on level ground frequently to save
battery charge.
※ It has been set up at the 10
th
stage for the default setting on your E-Bike.