Product Manual

2008/4/30 15
7
8
Refer to the instruction for Mounting
Battery Case to be mounted.
Install the saddle and adjust
it to the desired height and
then tighten the clamp lever.
Note: For your safety, do not
set the saddle height
exceeding the bottom line
on the seat post.
5
The unfolding steps are completed.
9
Adjust the tighten knob
to fasten the mudguard.
Note: Follow the same steps
while installing the
m
udguard on a new unit.
Pull the trigger of the pedal and unfold
the pedal simultaneously. Repeat the
same steps on the other side of the pedal.
6