Product Manual

2008/4/30 13
Insert the safety pin into the
locking holes to engage the
front and rear frame assembly.
Fold the front & rear
frame assembly as shown.
The folding steps are completed.
6
7
8
Loosen and then lower the lever to retreat the pin to release the clamping
of the handle bar. Keep the crank-pedals on the level while folding the
handle bar. Fold the handle bar downward toward the same side of the
kickstand and beyond the level of crank-pedals.
Note: Move the cables away from the quick-clamp to prevent accidental
Scratch on cables while folding.
9
10
11
Pull out the safety pin from the
locking hole.