User Guide

ELECTRONIC HOME/OFFICE SAFE

USER GUIDE

1. LCD display

2. The cover for emergency lock

3. Jack for emergency battery box

4. The hole to remove the cover

5. Fascia

6. Key

7. key(or knob)

8. Reset button

9. Battery compartment cover

10. Door

11. Emergency box

PRODUCT FEATURES

1. The intelligent electronic safes use the advanced digit circuit technology for the opening system.

2. High-performance chips imported are used with high standard of the intelligence including the function of

time reading and memory of previous opening.

3. Two codes of 4-8 digits are provided for security and easy to operate.LCD digital display provides digits for

operation procedures,codes on the display can be erased with ease,which adds to security.

PREPATION

1. This safe serves to protect your valuables, please install the safe on the wall or floor, or keep it in a secret

and safe place.

2. Open the door by emergency key or emergency battery box.

3. Uncover the battery compartment cover on the back of door, and put in four LR3(AM3, A4)/ 1.5V batteries.

(suggest to use alkaline battery). Please pay attentation to the polarity the batteries. For normal use, the

batteries could last for over one year.

4. When batteries are installed, the display will flash “ALL READY” for 1 second, and then the system is

actuated to scan the circuit. Afte that, it will be in standby mode, while showing year, month, date and day.

5. The preset code of safe on delivery is “1234”,the user may open the door with the preset code when

batteries are placed and tested normal.

CAUTION: For security of your property, you will need to change the preset code prior to use.

SET USER CODE

1. First press “#” the background light shines yellow, and then the display will read “…..”. Enter factory preset

code(or your own code using if the factory code has been changed), and press key “#” to confirm, if the buzzer

sounds, and the display read “OPEN” with the background light shining blue, the code confirmation is

successful.

2. Please press key “*” within 7 seconds and the display will read “….”. Now enter 4-8 digit code and confirm it

by pressing key “#”. At this time, The display will read “INTO”, So now you have successfully set use code,

which can be used to open the door.

PAGE 1
ELECTRONIC HOME/OFFICE SAFE USER GUIDE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. LCD display The cover for emergency lock Jack for emergency battery box The hole to remove the cover Fascia Key key(or knob) Reset button Battery compartment cover Door Emergency box PRODUCT FEATURES 1. The intelligent electronic safes use the advanced digit circuit technology for the opening system. 2.
PAGE 2
3.Another code is used for management and is suitable for hotel use.You may consult your local dealer for use method. OPEN THE DOOR 1. Press key “#” (the background light shines yellow). 2. Enter the correct 4-8 digits management code or 4-8 digits user code, then following 3 beeps, the display will read “OPEN” with the background light shining blue, that is, the code is correct, if you enter the wrong code, the display will read “ERROR”. 3.
PAGE 3
1). By emergency key (please referring to EMERGENCY KEY) 2). By emergency battery boxplug the emergency battery box jack to power. RESET BUTTON If your code is forgotten, press RESET BUTTON on the back of door to recall the factory preset code “1234”.