Use and Care Manual

4.5A HAND DRILL ENG
8
9
4.5A HAND DRILL ENG
Finally, firmly rotate the two separate chuck sections
in opposite directions. Your drill bit is now locked in the
chuck.
WARNING: Before installing accessory, remove
plug from power supply. Do not attempt to tighten
drill bits (or any other accessory) by gripping the front
part of the chuck and turning the tool on. Damage to the
chuck and personal injury may result.
6. HORIZONTAL BUBBLE LEVEL (See Fig. G)
Your drill is equipped with a bubble level that assists you
in drilling level holes. For horizontal drilling, tilt the drill
up or down as required so that the bubble floats in the
center of the parallel lines drawn on the glass.
NOTE: The level is filled with mineral oil that may cause
minor skin irritation when contacted If the level breaks
and this fluid gets on your skin, rinse thoroughly with
water. If any liquid gets in your eyes, rinse thoroughly
with wafer and call a physician immediately.
7. BELT CLIP (See Fig. H)
With the belt clip, the machine can be hung onto a belt.
The user has both hands free and the machine is always
within reach.
WORKING HINTS FOR YOUR DRILL
If your power tool becomes too hot, set the speed to
maximum and run no load for 2-3 minutes to cool the motor.
When drilling in metal, only use HSS, Titanium or Cobalt drill
bits that are in good condition.
Always use a magnetic bit holder when using short
screwdriver bits.
Where possible use a pilot hole before drilling a large
diameter hole in metal material.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and if damaged, have repaired by authorized service
facility.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your power tool. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls
free of dust. If you see some sparks flashing in the
ventilation slots, this is normal and will not damage your
power tool.
WARRANTY STATEMENT
If your Rockwell Shop Series tool becomes defective due
to faulty materials or workmanship within a period of 2
years from the date of purchase, we guarantee to:
• Replaceorrepairalldefectiveparts,freeofcharge,
or,
• Repairproductsfreeofcharge,or,
• Replacetheunitwithaneworre-conditionedunit,
free of charge.
Your warranty is subject to the following conditions:
• Batterypacksareguaranteedfora12monthperiod
only.
• Thetoolhasnotbeenmisused,abused,neglected,
altered, modified or repaired by anyone other than
an authorized service center.
• OnlygenuineRockwellShopSeriesaccessoriesand
parts have been used on or with the product
• Thetoolhasbeensubjectedtofairwearandtear.
• Thetoolhasnotbeenusedfortradeorprofessional
purposes.
• Thetoolhasnotbeenusedforrentalpurposes.
• Thetoolhasnotsustaineddamagethroughforeign
objects, substances or accidents.
Your warranty does not cover;
• Componentsthataresubjecttonaturalwearand
tear caused by use in accordance with operating
instructions.
• Unauthorized/impropermaintenance/handlingor
overload are excluded from this warranty as are
accessories such as bulbs, blades and bits, etc.
For guarantee claims, please contact the Rockwell Shop
Series Helpline and you will need to submit a proof of
purchase in the form of a valid receipt that displays date
and place of purchase.
We may require the tool be sent postage prepaid to
an authorized service center, along with all original
equipment.
Rockwell Shop Series Helpline 866-514-
ROCK(7625)
This guarantee statement does not replace but is in
addition to your statutory rights.
This warranty does not apply to accessories supplied
with the tool.
This warranty applies only to the original purchaser and
may not be transferred.
All repairs and replacement tools will be covered by the
limited warranty for the balance of the warranty period
from the date of the original purchase.
Limited 30-Day exchange policy
During the first 30 days after date of purchase, you may
exchange a tool which does not work properly due to
defects in materials or workmanship by returning the
power tool to the retailer where it was purchased. To
receive a replacement power tool, you must present
a dated proof of purchase and return all original
equipment packaged with the original product. The
replacement power tool will be covered by the limited
warranty for the balance of the two year period from the
date of the original purchase.