Product Manual

STEP 5 - HOIST ATTACHMENT

5.1 Wire rope hoist attachment (diagram 5A)

Attach wire rope hoist to hoist trolley using four 10mm hex bolts

and 10mm lock washers included with wire rope hoist. Terminate

power as required.

5.2 Standard hoist trolley attachment (diagram 5B)

Attach hoist to hoist trolley by snapping hoist suspension hook over

the trolley saddle clevis pin of hoist trolley.

STEP 6 - RUNWAY TAGLINE INSTALLATION

6.1 Loop cable through turnbuckle and turn back of cable on a thimble. Apply clamp as close to thimble as

possible. Tighten u-bolt to 10 ft.-lbs. of torque.

Diagram 6A. Attaching turnbuckle and thimble to left end of cable.

Diagram 5A. Wire rope hoist attachment.

1/11

Diagram 5B. Standard hoist trolley.