Product Manual

STEP 6 - RUNWAY TAGLINE INSTALLATION (CONTINUED)
6.2 Loop other end of cable around a thimble. Apply clamp
as close to thimble as possible. Adjust cable as
shown in diagram 6B. Tighten u-bolt to 10 ft.-lbs. of
torque.
6.3 Attach tagline assembly using 1/2-13, 3”
long hex bolt as shown in diagram 6D.
6.4 Adjust cable tension using turnbuckle. Do not overtighten.
Place S-hooks over tagline.
10
1/11
Diagram 6B. Attaching thimble to right end of cable.
168”
Diagram 6C.
Diagram 6D. Installing tagline on runway.
COLUMN WELDMENT
RUNWAY
WELDMENT
1/2-13, 3” LONG
HEX BOLT
TAGLINE
TURNBUCKLE
1/2” HEX NUT
THIMBLE
WIRE ROPE
CLAMP
Diagram 6E. Attaching tagline assembly.
TAGLINE
1/2” LOCKWASHER
TURNBUCKLE
S-HOOK