Safety Instructions

8
used for the lower piston. The nut no longer contributes to the sealing
so do not over tighten.
Water Traps and Filters
There is no filter or water trap supplied with this compressor. Most of
the water condenses out in the shop compressor tank. You can also
filter the incoming 125 psi line. See your shop compressor dealer for
these accessories. There are additional links to useful water traps
and other accessories on the website at Shoeboxcompressor.com
Heat Buildup
Under normal running conditions the parts inside the compressor can
reach temperatures in excess of 150 degrees Fahrenheit. Handling
these parts immediately after shutdown can cause severe burns.
Never spray the compressor with any flammable material or solvents.
Always use the compressor in an area with adequate ventilation.
How to Maintain the F10
Lubrication
The F10 ShoeBox Compressor comes equipped with the New Auto
Lube systems. However, it still requires manual lubrication on the
pistons near the support rod. To do this you simply remove the front
cover and dab a spot of white lithium grease on the pistons near the
support rod bearings. See our How To Videos to see exactly how to
do it. The felt pieces on the Delrin Nuts need to be maintained with
the supplied Silicone Oil as well.