User manual

8
2. Press to input punctuation marks when entering your Skype account.
3. Skype names can be 6 to 32 characters. You can use any mix of upper and lower
case characters, numbers and punctuation marks. You cannot use spaces and your
name cannot begin with a number or punctuation mark. If the name is already in
use, you will be prompted to try another name.
4. Password can be 4 to 20 characters. You can use any mix of upper and lower case
characters, numbers and punctuation marks. Your password cannot begin with a
number or punctuation mark, and it cannot be the same as your Skype name.
5. Please be patient as the creation of your Skype account may take several minutes
to perform.
To Sign in to Skype
When you already have a Skype account, you can sign in to Skype directly.
1. In standby mode, press to enter Sign-in page;
2. Use up / down to highlight Sign in to Skype, press to select the entry;
3. Use keypad to enter the Skype name, press to clear the incorrect character,
press to confirm your input.
4. Use keypad to enter the password, press to clear the incorrect character, press
to confirm the input;
5. You are now asked whether you want to save your Skype name and password for
automatic sign-in, press to accept, to decline.
Notes:
6. Skype does not allow emergency calls. Such calls are always routed to the
landline connection. Therefore it is important that you set the correct landline
country. Do not forget that your SK9500 has to be connected to a power outlet in
order to work. Your SK9500 will not function during a power failure.
7. For input methods please refer to the notes of Create a New Skype Account.
8. Please be patient as synchronization of Skype contacts might take several minutes.
9. If you have accepted the automatic sign-in, the account will sign in without any
prompting every time. For signing in another account, please refer to To Choose
Auto or Manual Sign In.