User manual

5

How to Install the Base
1. Connect on the base to a LAN (Local Area Network) port on your broadband
connection (modem, router, hub, switch etc.) using the provided Ethernet cable.
2. Connect the power adapter to an active power outlet and connect the power port
on the base to the power adapter (9V, 500 mA).
3. Connect on the base to a telephone socket (if available) using the provided
telephone cable.
 How to Install the Handset
a)
1. Push the top of the battery compartment cover on the back of the handset
downwards.
2. Insert the two batteries provided with the handset making sure that the plus and
minus ends are facing the same way as shown in the illustrations on the sides of
the battery compartment.
3. Slide the battery compartment cover shut.