User manual

4
Press this to make the
handset ring, if you cannot
remember where you put it
,
press it again to stop the
handset ringing.
Handset Locator Button
Press to end a telephone
call.
Press and hold 2-3
seconds to switch the
handset on / off ;
INT
Key
Press to make an intercom
call (if you have more than
one handset).
Right Key
The Network light comes
on when you have a
connection to the Ethernet.

The Handset and Base Unit at a glance
Left Key
Scrolling Key
Press to enter menu and sub-
menu mode;
Press to confirm selection;
With the key “*” to lock or
unlock the keypad;
Press during programming
to move through the menu;
Press during a call to
change the volume in the
earpiece.
Press to enter phonebook
menu;
Press during programming
to go back to the previous
option;
Press to clear digits from
the display.
End /On
-
Off
Key
Speakerphone Key
Press to turn the
speakerphone ON/OFF
Call
/
R
ecall
Key
Press to begin and answer
a
telephone call.
You can activate Recall
function if your phone is
connected to a PABX,
or if
you use Select Services.
Press t
o transfer an outside
call to another phone.
Charge Light
The IN USE light comes
on when you place calls.
The CHARGE light comes
on when the handset's
batteries are being charged.
In Use
L
ight
Note: Before you can use the
handset to make calls for the first time,
you will need to fit and fully charge the
batteries for 15 hours.
Network
L
ight