User manual

35
The operation is similar to answering a call. (Refer to To Answer a call section for more
details)
If the active call is a Skype conference call, you can see the participants via the View
Participants menu.

Message Waiting Indicator function
You must subscribe to Message Waiting Indicator from your service provider to use this
feature.
With this function, all your callers will be switched to the voicemail server to leave
messages, and the symbol “ ” will appear on idle screen when you have received new
messages, please follow the provider’s instruction to listen to the messages.
Troubleshooting
Always check first that:
•
You have followed the steps listed on pages to install and set up your SK9500.
• All connects are firmly inserted in their sockets.
• Mains power is switched on at the socket.
• The handset’s batteries are correctly and securely installed, and are not run down.
If you experience difficulties with the working of your SK9500, refer to the advice given
below.
I cannot make or answer calls.
• Check that the base unit’s mains power adapter is plugged in and power is switched
on. The base unit needs mains power for normal operation of the phone-not just
charging the batteries.
• Make sure you are using the telephone line cable that was supplied with your SK9500.
Other telephone line cables might not work.
• Move the handset closer to the base unit.
•
Check the batteries level symbol on the display. If it is low, replace the handset on the
base unit or charger pod to recharge the batteries.
• Switch off power at the mains socket, wait for a few seconds and then switch back on.
This may solve the problem.
• If you still can’t make calls, try re-registering the handset.