User manual

32
When adding a contact to your Contact list you will be prompted to specify if you want to
send an authorization request. We recommend that you send this request but you do not
have to do so –and you can send the request whenever you wish to. If you do not send the
request, you will never be able to see the contact’s online status. Users who have not been
authorized will be indicated by on your contact list.
1. In standby mode, press to enter the main menu;
2. Press and to select Contacts;
3. Browse your contacts using , press to select one you still have not sent an
authorization request;
4. Press and to select Advanced;
5. Press and to select Request Details;
6. Use the keypad to enter the text you want to send along with the request, press
to send the authorization request.
To Rename a Contact
1. Press and to select Rename under Advanced mode;
2. Use the keypad to enter the new name, press to clear the incorrect characters,
press to confirm;
To Remove a Contact
1. Press and to select Remove under Advanced mode;
2. Press and or just to select your desired types of remove (Remove and
block contact, Remove only
).
To Block a Contact
• Press and to select Block under Advanced mode. When you block the
contact successfully, press to go back to the Advanced mode;
• To unblock the contact, press to select Unblock under current Advanced mode;
To Check Contacts Requests
1. In standby mode, press to enter the main menu;